Thanks: 0
Likes: 0
Dislikes: 0
-
Adam's Complete Porter Cable 7424XP Polisher Kit!
Just got this Kit from Adam's site... and i was wondering how I should apply this on my car?
should I do in in sections? meaning do it to a small section of the car all 4 steps at a time? or do it in small sections of the car but do the whole car with one product then the next and next ect.?
also this will be my first time using any of Adam's products... anyone have any reviews? i notice autogeek doesnt sell any of his products.
LINK REMOVED : PLEASE REVIEW TERMS/CONDITIONS BEFORE POSTING LINKS TO COMPETITOR SITE
-
Super Member
Re: Adam's Complete Porter Cable 7424XP Polisher Kit!
This thread is not going to fly well
“Hard times create strong men, strong men create good times, good times create weak men, and weak men create hard times.”
-
Re: Adam's Complete Porter Cable 7424XP Polisher Kit!
-
Re: Adam's Complete Porter Cable 7424XP Polisher Kit!
Send it back cause those 7.5" pads they usually send with those kits are useless on a PC..buy a kit that has 5.5" pads with the PC they have them here at Autogeek or get a kit that has the MF pad kit bundle in 5.5" all the stuff they sell can usually be found on Chemical Guys for cheaper
-
Re: Adam's Complete Porter Cable 7424XP Polisher Kit!
ok well this is what i have for now... any advice on my question?
-
Re: Adam's Complete Porter Cable 7424XP Polisher Kit!
do small sections at a time doing whole car then move to next step..its going to take alot of extra effort with those 7" pads..I say make an order for some 5.5" low profile Lake Country Hydrotech pads they will make things alot easier for you keeping that PC spinning
-
Super Member
Re: Adam's Complete Porter Cable 7424XP Polisher Kit!
Originally Posted by DaMaN22
why is that?
I'm not an expert on forum rules, but I believe you may have broken the one about posting links to competitors sites
Why bring your questions here when Adams has a forum?
“Hard times create strong men, strong men create good times, good times create weak men, and weak men create hard times.”
-
Super Member
Re: Adam's Complete Porter Cable 7424XP Polisher Kit!
$350 for that kit?!?!?!? You got snookered
“Hard times create strong men, strong men create good times, good times create weak men, and weak men create hard times.”
-
Re: Adam's Complete Porter Cable 7424XP Polisher Kit!
Originally Posted by DaMaN22
Just got this Kit from Adam's site... and i was wondering how I should apply this on my car?
Just to help us improve our service... can you tell us why you chose to purchase from Adams site instead of our site? Maybe we're missing something?
Adam is a good and long time friend of mine, he's a good guy.
Originally Posted by DaMaN22
should I do in in sections? meaning do it to a small section of the car all 4 steps at a time? or do it in small sections of the car but do the whole car with one product then the next and next etc.?
If you're going to buff out your ENTIRE car from start to finish in one day then,
1. Start early it will take you all day
2. Wash and dry car, clay if needed
3. Divide each panel into small sections, about 20" squarish or so, don't try to buff a 2' x 2" section like most directions state as that's too large.
4. Do a Test Spot first, that is test out your "system" to one small section and make sure your getting the results you want before you buff out the entire car.
5. Buff one section for about 6-8 Section Passes, then wipe off the residue and inspect.
6. Once you prove your system then buff out the rest of the car section by section, panel by panel starting at the top and working your way down.
I cover all of this in my new book no matter whose products you're using.
E-book
(Displayed on iPad - iPad not included)
Paperback
Mike Phillips' Principles of Machine Polishing
Also, take some time to read through some of my articles on using the DA, most also have videos emedded...
Dual Action Polishers
Video: How-To do a "Section Pass" when Machine Polishing with a DA Polisher
The short how-to guide for using a DA Polisher
How to maximize the ability of the 1st Generation Porter Cable Dual Action Polishers
The long and in-depth guide for using a DA Polisher
The Definitive How-To Article for Removing Swirls, Scratches and Water Spots Using a Porter Cable 7424XP, G110v2 or Griot's Garage Polisher - Includes Videos
How to prime a foam pad when using a DA Polisher
DA Polisher Trouble Shooting Guide
Wet Buffing Technique
How-to Machine Apply Wax using a DA Polisher
How to Apply Dodo Pastes Waxes by Machine
How To Apply Mothers California Gold Carnauba Paste Wax by Machine
How much product do I use with my DA Polisher?
The Free Floating Spindle Assembly - The Story Behind The Story...
Handle? Or No Handle? - Using DA Polishers Without the Handle
New! Cyclo Model 5 Pro Series - Variable Speed
How to use a microfiber bonnet to remove dried wax by machine
DA Polishers - Stick Handle - Hoop Handle - Or no handle at all?
Griot's Random Orbital Polisher
Meguiar's G110v2 - 2nd Generation G110 Dual Action Polisher
Griot's Garage 3" Mini Polisher - Extreme Demo - Warning!
3" Mini Polisher- 2nd Generation Griot's Garage Mini Polisher
Show Car Garage Video: How to use the Cyclo Polisher to remove swirls and scratches
Show Car Garage Video: How To Remove Swirls, Scratches and Water Spots using a PC 7424XP, Meguiar's G110v2 or Griot's Garage 6" Random Orbital Polisher
DA Polisher Articles - Help for Newbies to Machine Polishing
-
Re: Adam's Complete Porter Cable 7424XP Polisher Kit!
If a person were to purchase something from Autogeek.net and then go to Adam's forum to ask questions, I'm confident the forum members, Mods and Admin would be professional and courteous...
I have not looked through the OP's posting history yet but he has a dozen or so posts to our forum. So they are either genuinely seeking help for their purchase or they are here for other reasons.
I like to give people the benefit of the doubt till they give me a reason to think otherwise...
Similar Threads
-
By Jdsuperbee13 in forum Off-Topic
Replies: 2
Last Post: 12-20-2013, 07:56 PM
-
By DaMaN22 in forum Auto Detailing 101
Replies: 15
Last Post: 11-22-2011, 08:33 PM
-
By acg in forum Porter Cable 7424XP Dual Action Orbital Polisher
Replies: 4
Last Post: 03-10-2011, 10:20 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
26 | 27 | 28 | 29 | 30 | 31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 | 5 | 6 |
|
Bookmarks