CarSpa Auto Spa Car Show in Stuart Florida sponsored by Autogeek

[Mike Phillips]

CarSpa Auto Spa Car Show in Stuart Florida sponsored by Autogeek


Last Tuesday Trey and I manned the Autogeek booth at the regular Tuesday night CarSpa Auto Spa Car Show here in Stuart, Florida.

At this show we buffed out a 1965 Mustang with most of the original paint still intact. The hood was recently repainted but the rest of the car was suffering from oxidation.

So we fixed it....

If you look at the face of the pad on the trunk lid you'll see blue paint... that's because back in 1965 cars came with single stage paint.




The below picture is cropped out of the above picture and you can clearly see the foggy looking dull oxidation common to old single stage paint.




Using the Flex 3401 to do the grunt work of removing oxidation...








Machine waxing with the Porter Cable...










Much better.... now the rest of the panels match the new paint on the hood....











Tools and Products Used

Pinnacle Advanced Compound

Pinnacle Advanced Finishing Polish

Pinnacle Liquid Souveran Wax

Flex 3401 Dual Action Polisher

Porter Cable 7424XP

Lake Country 6.5" Hybrid Pads (with the Flex 3401)

Lake Country 5.5" Flat Pads (with the Porter Cable)

Gold Plush Jr. 16" x 16" Microfiber Towels (lots of them)

Pinnacle Liquid Gloss Rinseless Wash with Carnauba

Pinnacle Ultra Poly Detailing Clay

Pinnacle Clay Lube

[Mike Phillips]

Does anyone recognize this past project car?






Can anyone correctly state what was done to this old Ford?

If so... win something off Nick's desk!

[Mike Phillips]

Does anyone remember the write-up for this old Ford?

[Guyb]

The yellow 28 Model A is the Zero Hologram project. Full wetsand and cut and buff. A beautiful car.

[DaveT435]

See so many cars I get confused lol was the Orange Ford the one you just did the new Menzera AIO on?

[haris300]

Orange car got hit up with the new Flex PE8 mini rotary

[DaveT435]

Right...I knew I had just seen the vehicle. The AIO was a truck I believe

[Hazcat]

The yellow one was a wetsand, cut and buff but I believe it was for an extreme orange peel problem with a new paint job. Very nice car.

[RobertJ34]

Yellow 1928 Model A Coupe. Wetsand and used rotary buffers for the project. Finished with Dodo Juice Supernatural Wax

[Mike Phillips]

The yellow 28 Model A is the Zero Hologram project. Full wetsand and cut and buff. A beautiful car.

Correctamundo...

The current owner of this Model A had no idea that we here at Autogeek did the wetsand, cut and buff on his beautiful car. So I shared that with him and took the above picture.

Here's the thread...

Pictures: 1928 Model A - Wetsand, Cut and Buff at Autogeek


On the left is John and on the right is Patryk and they are doing some machine wetsanding between the ribs on the filled roof.





Here's Matt and Craig learning to machine wetsand for their first time on a 1928 Model A Hotrod...

Notice how well taped-off this hotrod is? That's because it has a lot of curves and edges and paint is thinnest in these areas. The tape not only protects these areas but it's a visual reminder to avoid sanding on these areas.




Big Boys Toys
After getting the feel for how to machine sand using the 3" Peanut Polishers, I let the guys move up to the big boys toys meaning move up to the 6" 3M Trizact Discs on full size dual action polishers. Below Den is using the Meguiar's G110v2 as a machine dampsander.






Finished...

See so many cars I get confused lol was the Orange Ford the one you just did the new Menzera AIO on?

Yes...


Little Deuce Coupe - Hotrod Detailing


There's just too many pictures showing how to buff out a hotrod like this in the above thread that if you want to see them.... click on the link... it's basically a how-to book on how to buff out a car. And it was a MESS when it arrived here....

Orange car got hit up with the new Flex PE8 mini rotary

And yes....


The NEW FLEX PE8 Kompakt Rotary Polisher Polisher in ACTION!