i had the same problem and switched to the mez super intensive polish which caused me no problem. i use the pc dp with lc 5.5 and 4.0yellow pads then finish with ultima wipeon/walk away sealant. the paint looks 1" deep. hope this helps.
budinsc
Menz SIP doesn't even compare to M105 in terms of cut.
I have never really had a problem with M105 slinging, but then again I use a Flex 3401 and the KBM method - that Dave taught me - right from the beginning.
I have never really had a problem with M105 slinging, but then again I use a Flex 3401 and the KBM method - that Dave taught me - right from the beginning.
Whats the KBM method?
Rule 62: Don't take yourself to d*mn seriously
Cincinnati, OH
Shawn
Bookmarks