SpeedFreak Detailed: Alpine White BMW 1M correction

[SpeedFreak81]

Hey guys, this gentleman contacted me on another forum about doing a single stage correction on his Alpine White 1M. No before shots, but there were very light swirls present throughout, other than that pretty clean. Objective was to clean up the surface, remove as much swirling as possible, and punch up the gloss! Unfortunately it was very overcast all day so no sun shots, and white is hard to get reflection shots of while overcast.....so not my best photography work but you get the idea.


Products used:

• Sonax Full Effect wheel cleaner
• ZEP Citrus Degreaser
• CG Citrus wash
• CarPro Iron X
• Pinnacle Speed Clay
• DoDo Juice Born Slippery clay lube
• Menzerna SF4500 (85rd) on LC CCS Grey pad via FLEX 3401
• HD Poxy paint sealant
• Sonax glass cleaner
• Optimum metal polish
• Adams super VRT tire dressing

Afters




DSC_0187 by SpeedFreak81, on Flickr




DSC_0190 by SpeedFreak81, on Flickr




DSC_0164 by SpeedFreak81, on Flickr




DSC_0163 by SpeedFreak81, on Flickr





DSC_0160 by SpeedFreak81, on Flickr




DSC_0176 by SpeedFreak81, on Flickr




DSC_0159 by SpeedFreak81, on Flickr




DSC_0173 by SpeedFreak81, on Flickr




DSC_0174 by SpeedFreak81, on Flickr




DSC_0182 by SpeedFreak81, on Flickr




DSC_0166 by SpeedFreak81, on Flickr




DSC_0183 by SpeedFreak81, on Flickr




DSC_0167 by SpeedFreak81, on Flickr




DSC_0168 by SpeedFreak81, on Flickr


Thanks for looking!

-Brian
SpeedFreak Detailing

[AeroCleanse]

Looks great!

[psynx]

Damn nice work and a beautiful car + color

Sent from my SCH-I605 using AG Online

[quiksilver_ben3]

Looks great.

[JSou]

Clean white BMW = win.

[Mike@DedicatedPerfection]

Looks good Brian.

The swirling must not have been very bad to start with. Suprised you didnt use something more aggressive than SF4500 on a gray finishing pad for a bit more correction work.

[Marc08EX]

Nice work Brian! The 1M is looking proper.

[zmcgovern45]

Nice work!

Car would be perfect if it were lowered some.

[SpeedFreak81]

Looks good Brian.

The swirling must not have been very bad to start with. Suprised you didnt use something more aggressive than SF4500 on a gray finishing pad for a bit more correction work.

I can actually achieve quite a bit of correction with this combo. Speed 6 on the FLEX and ultra slow arm speed might surprise you. Also, the increase in gloss and clarity is unmatched.

Brian
SpeedFreak Detailing

[Sicoupe]

Great work! Love the car