Best of luck to you, I'm still waiting for a large order that I placed on 4/12. I've been bit twice and I can guarantee you there sure as hell wont be a third time!!!!!!!!!!!!!!!!!!!!!!!!!!
Good thread, I work with a Rupes and microfiber pad quite a bit. Compressed air is by far the best way to clean your pad after each section, but depending on the psi and air nozzle you are using,...
Have you tried wrapping a microfiber around the small attachment that has about 5 holes in it? I've used that, and it works pretty good. I took the clip off and just hold the microfiber by hand.
A thimble is a metal piece the vent piping passes through to maintain your clearances from combustible material. I was not 100% sure on my local codes regarding gas pipe venting, so I had my HVAC...
I did the same thing, went from mobile to detailing in my 2 1/2 car garage for the winter. For heat I bought a Modine Hot Dawg 45,000 BTU. The vent can go vertical or horizontal. Of course you...
Yup, when they install those weights they damage the clear coat and then the salt can find its way in over the winter and oxidize the wheels really fast. Game over...
Since they are winter wheels, looks like the salt found its way under the clear coat and oxidized the aluminum and is still spreading just like rust would do. Are they GM wheels? Its extremely...
Rear hitch is the way to go. And then if your like me your also worried about the paint on your bike. 1up USA is the best bike rack available IMO. The rack only grasp the tires so it will never...
Hi Marc, have you ever tried Meguiars Marine/RV #91 Power Cut Compound? I find it easier to use than 105 on gel coat. From what ive read, its basically the same as 105 but formulated just for gel...
Good morning everyone!! I have been using my mytee lite II all spring and summer and it has been very reliable for me. I say I use it 3-4 times a week.
I always use gloves when detailing and have been using a 3m particle mask 8511 for bad interiors and non-acid wheel cleaners. I picked up some D140 only for the most neglected wheels.
I only use OPC on paint for bugs on the front bumper and mirrors that are really hard to get off. I usually split the bumper in 3 parts and work in sections to minimize the time OPC is on the paint....
Meanwhile, large corporations like PB are allowed to dump tons and tons of ammonia, mercury and heavy metal sludge into southern lake Michigan. Crazy isn't it?
I've used Optimum Power Clean at 4:1 on Acura MDX leather and it came out clean as new each time. One of them the leather was light gray and very dirty. I used OPC and a super soft cyclo brush on...
I am meeting with a potential customer tomorrow to inspect her 2007 Suburban. Apparently the road commission painted yellow lines right before a strong thunderstorm. Suburban then drove down road...
Ive been using the whole line of cyclo brushes that I use on my PC and love then, the softest one is great for really dirty leather, aqua great for carpet, and white for all weather mats and even...
