Review - Meguiar's Ultimate Fast Finish

**Paul A.** · 01-18-2017, 09:51 AM

Excellent product review, Mike! Thank you. Very thorough.

**The Guz** · 01-18-2017, 11:23 AM

Originally Posted by RTexasF

Once again....how much was remaining in the can approximately?

Hardly used any. The can still feels completely full. The product goes a long way.

**Loach** · 01-21-2017, 07:18 PM

Originally Posted by mwoywod

I keep waiting for someone to mention this, but Ultimate Fast Finish may in fact easier to use, but I became completely uninterested when I read a post from one of Meguiars product and training specialists saying UFF WOULD stain black trim and rubber.

That makes it the only WOWA sealant that cannot be used on trim. In my opinion, I do not care how easy it is to apply and remove. Part of the appeal of these types of sealants is the convenience to use them on virtually ANY exterior surface and know they will protect and at a level enhance the appearance. If I have to worry about accidentally hitting the a molding with my applicator I may as well find my bottle of Nu Finish and use it. (I'm being a bit facetious, but the truth is I personally do not see the product being much of a success for the reasons I mentioned above)

Spent some time today working with Fast Finish on the trim, there was no difference that I could tell with how this behaves with the trim compared to Opti-Seal. They both had an immediate darkening effect when covering, then as they flashed the trim went back to normal (in my case, back to semi-faded). Sprayed it directly on the trim in one spot and let it sit for 30 minutes and it spread right off and left no imprint after wiping. I saw Nick's post as well, but I'm not seeing any problems with it in my tests, if you happen to get it on there and wipe it off you shouldn't have issues.

**GSKR** · 01-21-2017, 08:22 PM

Off topic I bought a can of that new meguairs paste wax and wow.I used it with a gg 3 inch machine with a orange foam pad on a white trashed ford focus.stuff is very easy to use and glossy results in the hot blazing sun with zero promblems.Alot of these products are duplicated but not this stuff.it's more of a cream than a paste your use to seeing,with the polishing substance it cleans and protects the paint in one.Stay off the trim as I can see this will leave staining. For 16.00 bucks you can't beat it if your in a hurry with awesome results.

**Eldorado2k** · 01-21-2017, 08:59 PM

Originally Posted by GSKR

Off topic I bought a can of that new meguairs paste wax and wow.I used it with a gg 3 inch machine with a orange foam pad on a white trashed ford focus.stuff is very easy to use and glossy results in the hot blazing sun with zero promblems.Alot of these products are duplicated but not this stuff.it's more of a cream than a paste your use to seeing,with the polishing substance it cleans and protects the paint in one.Stay off the trim as I can see this will leave staining. For 16.00 bucks you can't beat it if your in a hurry with awesome results.

Is that the Mirror Bright round can?

Sent from my iPhone

**GSKR** · 01-21-2017, 09:20 PM

Originally Posted by Eldorado2k

Is that the Mirror Bright round can?

Sent from my iPhone

Yes great stuff.I find it works great worked into the paint with a small machine such as gg 3 inch tool.I haven't tried it by hand only but amazing results for a simple can of wax.

**The Guz** · 01-21-2017, 09:22 PM

Originally Posted by GSKR

Off topic I bought a can of that new meguairs paste wax and wow.I used it with a gg 3 inch machine with a orange foam pad on a white trashed ford focus.stuff is very easy to use and glossy results in the hot blazing sun with zero promblems.Alot of these products are duplicated but not this stuff.it's more of a cream than a paste your use to seeing,with the polishing substance it cleans and protects the paint in one.Stay off the trim as I can see this will leave staining. For 16.00 bucks you can't beat it if your in a hurry with awesome results.

I'm surprised the Mirror Bright polishing wax in liquid form didn't gain a lot of traction as it is the same as the past form. Thanks for providing your feedback. I was always curious hot it performed in terms of correction as it does contain the patented SMAT abrasives.

**GSKR** · 01-21-2017, 09:38 PM

I was on the fence when I was at ag this morning,like do I really need more wax so I purchased it and used it on a very rough focus.she had a budget of 100.00 so i quickly worked on this focus and it's super slick when the paint is prepared. I nano mitt and iron x the car then worked the product in with my gg3.I used the very dense orange foam cutting pad and it took me 40 minutes to to a nice job on the paint.meguair's did a great job with this stuff but have no idea about durability.

**The Guz** · 01-21-2017, 09:56 PM

Originally Posted by GSKR

I was on the fence when I was at ag this morning,like do I really need more wax so I purchased it and used it on a very rough focus.she had a budget of 100.00 so i quickly worked on this focus and it's super slick when the paint is prepared. I nano mitt and iron x the car then worked the product in with my gg3.I used the very dense orange foam cutting pad and it took me 40 minutes to to a nice job on the paint.meguair's did a great job with this stuff but have no idea about durability.

Nice. Let me know how long you get out of it if you see the car again. Supposedly it is supposed to last as long as ultimate wax (which is essentially up to 6 months). I get around 5 months on UW.

**GSKR** · 01-21-2017, 10:06 PM

Originally Posted by The Guz

Nice. Let me know how long you get out of it if you see the car again. Supposedly it is supposed to last as long as ultimate wax (which is essentially up to 6 months). I get around 5 months on UW.

I hope I never see it again.I really wanted to leave as this thing was so bad.car was blasted and mismatch paint and over spray everywhere.I couldn't leave as this was a referral from one of my clients.