Thanks: 0
Likes: 0
Dislikes: 0
-
Super Member
Re: How to wet sand a car - video
Originally Posted by Mike.Phillips@Autogeek
I personally think it came out really nice. For YEARS I've had people ask for a video on how to wetsand a car but no one is going to watch 12 hours of video.
LOL never say no one because I know I would watch a 12 hour video more than once .
-
Super Member
Originally Posted by Evan.J
LOL never say no one because I know I would watch a 12 hour video more than once .
Same here,
-
Re: How to wet sand a car - video
Originally Posted by ken tuep
Wow, you were hustling! A car that size would probably take me 20+ hours to cut and buff. Great job!
All my life when I've detailed cars I pretty much start early and don't stop till the final wipe... It's not a great "style" but doing projects like this one takes both a lot of time and concentration and every minute you're goofing off, or getting a glass of water, there's work not being done.
Originally Posted by ken tuep
Were there any runs or other bad spots that required more sanding? Or just 3000 then 5000 to knock down the texture?
There were two runs, one on the driver's side lower body panel and one on the passenger side lower door and I knocked these out after the fact using a Unigrit Block. Didn't what the "time" it took to interfere with the "big picture" of capturing the entire process from start to finish on video.
-
Super Member
Re: How to wet sand a car - video
Subbed to watch the master over and over again!
-
Super Member
Re: How to wet sand a car - video
Mike,
I recently purchased the Flex PE14 rotary buffer and it came with the 6" flexible yellow backing plate. I noticed that you were using an extension on your Flex and what seemed to be a different type of backing plate. What exactly did you use and any particular reason?
-
Super Member
Re: How to wet sand a car - video
I'm just a novice at detailing but I assume that wet sanding removes the clear coat and only the base coat remains. It must be more important that a good coat of wax/sealant be maintained on the base coat after wet sanding.
-
Re: How to wet sand a car - video
-
Super Member
Re: How to wet sand a car - video
Originally Posted by fosaladrigas
I'm just a novice at detailing but I assume that wet sanding removes the clear coat and only the base coat remains. It must be more important that a good coat of wax/sealant be maintained on the base coat after wet sanding.
All of the clear coat is not removed. It is just the "peaks" of the orange peal that is removed to level down to the "valley's". At that point the clear coat is polished back to a brilliant shine. This all must be done delicately as the clear coat is SUPER thin.
-
Re: How to wet sand a car - video
Originally Posted by fosaladrigas
I'm just a novice at detailing but I assume that wet sanding removes the clear coat and only the base coat remains.
It must be more important that a good coat of wax/sealant be maintained on the base coat after wet sanding.
Good question Frank...
Originally Posted by Kevin Cullen
All of the clear coat is not removed. It is just the "peaks" of the orange peal that is removed to level down to the "valley's".
At that point the clear coat is polished back to a brilliant shine. This all must be done delicately as the clear coat is SUPER thin.
Pefect answer Kevin...
By the way, Frank lives in South Florida and he joined us last Thursday night and has his first chance to see what wetsanding is all about...
Pictures: 1928 Model A - Wetsand, Cut and Buff at Autogeek
Frank's First Time
Here's Frank learning all about how to wetsand, cut and buff fresh paint here at Autogeek's Show Car Garage!
This was Frank's first visit to our Thursday night gigs and he picked an great night to join us as not only did he get to see the entire process from sanding, cutting, polishing and machine waxing a very cool traditional hot rod but he also was able to helps us restore the original paint on a 1956 Chevy Bel Air.
-
Super Member
Re: How to wet sand a car - video
Originally Posted by Mike.Phillips@Autogeek
How to wet sand a car - Time Lapse Video
Back in March of this year, (2013), I did a complete wet sand, cut, polish and even machine waxed a 1964 Chevrolet Malibu and while doing this project, Yancy set the GoPro camera up to take a picture every minute.
It's been in queue for editing since then but I'm happy to announce it's now been edited and uploaded to our YouTube Channel.
How to wet sand a car
How to wet sand a car
Wow!! That no doubt is the Pinnacle of all time lapse sand, cut, polish, wax & detail videos.
As usual, you're setting and raising the bar.
Awesome video Mike!!
Similar Threads
-
By Gcleov in forum Wet-Sanding, Cutting & Buffing
Replies: 12
Last Post: 02-14-2016, 10:34 AM
-
By Mike Phillips in forum PICTURES: Wednesday Night Detailing Classes
Replies: 7
Last Post: 12-10-2012, 09:22 AM
-
By Royaldetail in forum Wet-Sanding, Cutting & Buffing
Replies: 8
Last Post: 06-07-2012, 01:38 PM
-
By Mike Phillips in forum Company & Forum News Headlines
Replies: 1
Last Post: 09-10-2010, 08:39 PM
-
By LUV4MY5 in forum Auto Detailing 101
Replies: 8
Last Post: 07-20-2007, 10:20 AM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
28 | 29 | 30 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
| 1 |
|
Bookmarks