Thanks: 0
Likes: 0
Dislikes: 0
-
Super Member
PC Modification For Use Without The Handle
PC Modification For Use Without The Handle
Does anyone know off-hand what the thread size is on the PC 7424XP handle?
I wanted to pick up a couple bolts on my way home today, but forgot to bring the handle with me to compare sizes with.
I want to place the bolts where the handle screws in to the head of the polisher to help hold the plastic housing in place as well as keep any rattles to a minimum.
So does anyone happen to know what the thread size is?
-
Super Member
Re: PC 7424XP Handle - Thread Size
I just looked up the part# for the handle on Porter Cables site and found the thread size.
Thread Size: 5/16-18
In case anyone is interested.
-
Re: PC 7424XP Handle - Thread Size
Sorry... had that on a to-do list all day just didn't get to it...
You going to purchase some stubby bolts to hold the plastic cover on instead of using Duct Tape?
-
Super Member
Re: PC 7424XP Handle - Thread Size
-
Re: PC 7424XP Handle - Thread Size
Very nice and this will help a lot of people that like you and I... prefer to not use handles on their polishers... plus it looks better than duct tape...
Moving this thread to Hot Topics and Frequently Asked Questions
-
Super Member
Re: PC 7424XP Handle - Thread Size
Just some additional info for anyone in the future.
The old Meguiar's G100 polisher also has the same thread size. (5/16"-18)
I had been meaning to install the bolts on the plastic housing of my G100 polisher for several years now, but just never got around to it. So after installing the bolts on my new PC7424XP, I went out and bought (2) 5/16"-18 x 3/4" long hex head bolts and washers and installed them in my old G100 polisher.
So either 5/16"-18 x 1/2" long or 5/16"-18 x 3/4" long bolts will work for both polishers.
-
Re: PC 7424XP Handle - Thread Size
Moved from Hot Topics to Tips and Techniques...
-
Re: PC Modification For Use Without The Handle
Here's an article that goes over the topic of handles on DA Polishers...
Handle? Or No Handle? - Using DA Polishers Without the Handle
-
Re: PC Modification For Use Without The Handle
Just to chime in...my PC is NOT 5/16! It's M8X1.25. It is only about 6 months old. Whether or not this is now common or not is anyones quess.
Before you try and 'force' a 5/16 in there...try the M8.
Bill
-
Super Member
Re: PC Modification For Use Without The Handle
Originally Posted by BillE
Just to chime in...my PC is NOT 5/16! It's M8X1.25. It is only about 6 months old. Whether or not this is now common or not is anyones quess.
Before you try and 'force' a 5/16 in there...try the M8.
Bill
You are correct. I just checked Porter Cables parts site and they now have 2 different threaded handles listed for the 7424XP that was not listed previously. It seems the newest model polishers must now be using the M8 x 1.25 threaded handle. The 5/16-18 threaded handle on Porter Cables site is listed for 7424XP polishers with date code 2009-10 and earlier.
Similar Threads
-
By Don M in forum Off-Topic
Replies: 7
Last Post: 04-25-2020, 10:45 AM
-
By Mike Phillips in forum How to articles
Replies: 11
Last Post: 04-24-2019, 06:53 AM
-
By richy in forum Flex Polishers
Replies: 17
Last Post: 07-29-2015, 12:36 PM
-
By cobalt9123 in forum Customer Comments
Replies: 16
Last Post: 03-25-2011, 12:09 PM
-
By Mike Phillips in forum Porter Cable 7424XP Dual Action Orbital Polisher
Replies: 37
Last Post: 12-04-2010, 07:14 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
28 | 29 | 30 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
| 1 |
|
Bookmarks