Fill Line?

**BobbyG** · 09-16-2010, 06:38 PM

Like many of you I bought 1/2 dozen Meguiar's 32oz spray bottle for various products. The come with quite allot of useful information printed on the sides including dilution rates.

Pour you favorite solution up to the correct line and then add the water to make up the remainder of the 32oz.

Great information but where does it indicate: Fill to Here?

I guess I could pour 4 cups of water in and figure it out for myself but wouldn't it be easier for the manufacturer to indicate this?

**Mindflux** · 09-16-2010, 06:42 PM

Mike has covered this before one of the molded ridges is the fill line. I forget which one.

How to properly dilute Meguiar's Detailer Line products - Car Care Forums: Meguiar's Online

**Jeff120** · 09-16-2010, 06:47 PM

Its the ridge just above the label. Not even to the neck.

**Jeff120** · 09-16-2010, 06:48 PM

Can I link to megs forum?

How to properly dilute Meguiar's Detailer Line products - Car Care Forums: Meguiar's Online

**snowking724** · 09-16-2010, 06:49 PM

Originally Posted by Mindflux

Mike has covered this before one of the molded ridges is the fill line. I forget which one.

How to properly dilute Meguiar's Detailer Line products - Car Care Forums: Meguiar's Online

looks like i've been diluting a little weak! thanks for that

**Jeff120** · 09-16-2010, 06:50 PM

Also their bottles are different from many other bottles. You fill with water first, then the product. Most other bottles are product then water. If you do that with megs. bottles you will have a VERY strong solution and a waste of product as well.

**BobbyG** · 09-16-2010, 07:00 PM

Thanks guys!

A couple might be just a little weak but not much!!

I still think a "Fill to Here" something should be there otherwise how the heck would one know?

**Dubbin1** · 09-16-2010, 07:37 PM

Just figured I would add the picture to the thread.

**DaHen** · 09-16-2010, 07:37 PM

I'm sure that our tap water is clean. But I'd use distilled water just to make sure that the product doesn't get contaminated.

(Even when mixing Weed-B-Gon and stuff for the lawn, I use distilled water.)

**Kurt_s** · 09-16-2010, 09:14 PM

Originally Posted by DaHen

I'm sure that our tap water is clean. But I'd use distilled water just to make sure that the product doesn't get contaminated.

(Even when mixing Weed-B-Gon and stuff for the lawn, I use distilled water.)

Weed be gone; household water (much less reclaimed water) will be fine. They only need garden hose dilution since they are often sprayed with hose water.

In the case of car products, household water should be fine in most cases but I use RO water since I have it.