Dislikes: 0
-
Super Member
Forced Rotation DA
I'm considering a forced rotation DA. I have a G21 now as my workhorse.
For those who have both long throw and forced rotation DA, which do you end up gravitating towards for basic swirl removal, AIO, jeweling, etc. (and not for aggressive compounding or serious cutting requirements)? I'm just trying to figure out if I get a forced rotation DA, might I gravitate towards one or the other or are there distinct use cases for both so neither gets neglected over time?
I am a hobbyist so I will not be using this to make money.
-
Re: Forced Rotation DA
Originally Posted by Route246
I'm considering a forced rotation DA. I have a G21 now as my workhorse.
For those who have both long throw and forced rotation DA, which do you end up gravitating towards for basic swirl removal, AIO, jeweling, etc. (and not for aggressive compounding or serious cutting requirements)? I'm just trying to figure out if I get a forced rotation DA, might I gravitate towards one or the other or are there distinct use cases for both so neither gets neglected over time?
I am a hobbyist so I will not be using this to make money.
When I had my G21 and 3401..my 3401 collected dust.
Now that I have a PO5000C I seem to be using that more than my G21
Also gravited from a 75E to GG6 with Griot HD 3in BP
-
Super Member
Re: Forced Rotation DA
Originally Posted by Mike@ShineStruck
When I had my G21 and 3401..my 3401 collected dust.
Now that I have a PO5000C I seem to be using that more than my G21
Also gravited from a 75E to GG6 with Griot HD 3in BP
Thank you. That is the sort of feedback I am interested in.
I'm curious why you like the PO5000C better than the 3401?
-
Re: Forced Rotation DA
My 3401 comes out when I need to get something done quick, or when I'm working on really curvy areas.
My preference is still my XFE-7. Its more comfortable to use, quieter, and doesn't beat you up like the 3401.
I would have a void in my arsenal if I got rid of my 3401 though- it just "works." Well see if down the road I don't replace it with the Mille
Brandon Visser | 269-569-1900 | b5visser@live.com
Owner/Appearance Specialist | @domainappearance
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Forced Rotation DA
I have a 7424xp, GG6, BOSS G15 and Makita 5000 . For polishing and AIO work, the GG6 and BOSS G15 get the most use by far - with the edge going to the G15 as the one used the most because it is just such a pleasure to use. The 5000C only gets used when I need to do some serious compounding and then out comes one of my free spinning DA's as a finisher. It's not that the free spins can't be used to compound - they can - but this allows me to divide the work load among two machines.
ScottH
-
Post Thanks / Like - 1 Thanks, 2 Likes, 0 Dislikes
-
Re: Forced Rotation DA
3401 if you want quick and efficient paint correction on medium to hard paint. Powers through curves and the like. Won't correct as fast as a 21mm, but more versatile. Requires more energy than a 21mm, however. I never use the 3401 on soft black paint, as it doesn't finish well.
-
Re: Forced Rotation DA
Originally Posted by Route246
Thank you. That is the sort of feedback I am interested in.
I'm curious why you like the PO5000C better than the 3401?
It doesn't get hot, doesn't beat you up from vibration and walk.
It's Soo much more smooth and balanced.
More ergonomic .
Body is longer, stroke is shorter to midigate possible walk.(still can walk with a stiff pad like B&S low pros)
I can swap in a 3in BP if I want to
I've done a test with 1000 wetsanding mark removal between the two side by side...3 passes max speed heavy cut LC thinpro pad and TLC compound with weight of.machine....makita took out more marks. Had a fellow local detailer perform same test and he got same results.
Since it has less stroke, they needed more OPM and More RPM to match or surpass the 8mm 480rpm/4800 OPM flex.
People over seas are saying the PO6000C and the Mille is outcorrecting the flex too
Oversees 3401 has 1200 watts
-
Super Member
Re: Forced Rotation DA
I have a 3401 and a Mark 2 21mm Knock off along with PC 7242 and GG6 I always always end up using the 3401. I was just looking at the Mikita that autotopia has on sale with 15% off and free shipping. I have had great success with the 341and am about to push the button in the Makita. I like the option of having the forced and the free movement option in one unit. Overall the 3401is a good choice. I am just now thinking about the makita and as I am writing this I am not gonna a pull the plug. The 3401is my go to with the two backing plates. I use the 4 3/8” and the 5.5”.
-
Super Member
Re: Forced Rotation DA
Originally Posted by WRAPT C5Z06
I never use the 3401 on soft black paint, as it doesn't finish well.
We'll have to agree to disagree there. I use it on black and soft blacks all the time with fantastic results. IMO it's a matter of pairing it up with the right pad, polish and speed setting. I've posted plenty of blacks and dark colors here.
To the Original Poster, the Flex 3401 is my go-to model and I use it all the time. Love it. The effort to use it doesn't bother me.
2019 Pearl White Accord 2.0T Touring (mine)
2023 Snowflake Pearl White CX-30 Turbo Premium Plus(wife)
2010 Urban Platinum Metallic CRV EX-L & 2014 Mica Black Metallic Toyota Corolla S (kids)
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Forced Rotation DA
Originally Posted by Mike@ShineStruck
It doesn't get hot, doesn't beat you up from vibration and walk.
It's Soo much more smooth and balanced.
More ergonomic .
Body is longer, stroke is shorter to midigate possible walk.(still can walk with a stiff pad like B&S low pros)
I can swap in a 3in BP if I want to
I've done a test with 1000 wetsanding mark removal between the two side by side...3 passes max speed heavy cut LC thinpro pad and TLC compound with weight of.machine....makita took out more marks. Had a fellow local detailer perform same test and he got same results.
Since it has less stroke, they needed more OPM and More RPM to match or surpass the 8mm 480rpm/4800 OPM flex.
People over seas are saying the PO6000C and the Mille is outcorrecting the flex too
Oversees 3401 has 1200 watts
Thank you for this feedback. It just tipped me over....
Originally Posted by Eandras
I have a 3401 and a Mark 2 21mm Knock off along with PC 7242 and GG6 I always always end up using the 3401. I was just looking at the Mikita that autotopia has on sale with 15% off and free shipping. I have had great success with the 341and am about to push the button in the Makita. I like the option of having the forced and the free movement option in one unit. Overall the 3401is a good choice. I am just now thinking about the makita and as I am writing this I am not gonna a pull the plug. The 3401is my go to with the two backing plates. I use the 4 3/8” and the 5.5”.
Whoa!!! Whoa!!! Whoa!!! Thanks for the 15% Autopia heads-up. I can get the PO5000C for $280 or so! This doesn't happen very often and I missed the gift certificate promo in December because I was traveling in Asia at the time and couldn't order from there for some reason. Ordering now.
Similar Threads
-
By tattooman in forum Auto Detailing 101
Replies: 12
Last Post: 01-29-2019, 08:54 PM
-
By brettS4 in forum Auto Detailing 101
Replies: 3
Last Post: 10-07-2017, 09:00 PM
-
By gofastman in forum Auto Detailing Tools and Accessories
Replies: 7
Last Post: 02-04-2016, 11:44 AM
-
By roguegeek in forum Flex Polishers
Replies: 12
Last Post: 05-19-2015, 08:14 PM
-
By tedhw in forum Porter Cable 7424XP Dual Action Orbital Polisher
Replies: 8
Last Post: 03-04-2014, 08:30 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
28 | 29 | 30 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
| 1 |
|
Bookmarks