2012 Chevy Camaro HD CUT / Wolfgang Deep Gloss Paint Sealant

[DeansDetailing]

2012 Chevy Camaro One step, basic interior…

Co-worker wanted his 2012 Camaro done. It was in decent shape to begin with so no before pics.

There were a fair amount of swirls, but the white hides them well. I started by trying Wolfgang Swirl Remover with a LC White Pad. Wasn’t feeling that so moved to orange…still wasn’t feeling it. Tried HD CUT with White pad…nah. HD CUT with Orange pad…ok…that’s the ticket on this job! It got rid of appx 60%-70% of swirls with 2 passes.


Wash – Meguiars Hyperwash / Wolfgang Quart Foamaster Foam Gun / Chemical Guys Chenille Microfiber Premium Wash Mitt / Supreme Guzzler Waffle Weave / Werner Pro Deck Aluminum Work Platform
Bugs – Poorboy’s World Bug Squash/ Stoners Tarminator / Safe Scrub Bug and Tar Pad
Wheels / Tires / Wheel Wells – Stoner’s Tarminator / Poorboy’s World Spray and Rinse Wheel Cleaner 1:2 / Detailers Pro Series Hi-Intensity APC 1:4 / Speed Master Wheel Brush / TUF SHINE Tire Brush / Clean Wheel Lug Nut Brush / Mothers Wheel Brush / Optimum Opti-Bond Tire Gel / Collinite 845 on wheels
Paint – Porter Cable 7424XP / HD CUT / Lake County CSS Orange Pads / Chemical Guys Orange Hex pads / ISP Wipe / Wolfgang Deep Gloss Paint Sealant
Trim – Wolfgang Trim Sealant
Interior - DP Hi-Intensity APC / RIDGID WD1270 / CarPro Perl
Glass – DP Krystal Vision Glass Cleaner / ISP / Waffle Weave Glass Towels

[WaxMaster1]

Looks good for what I can see being white is hard to tell. Question: After the HD Cut was there any "dullness" or did the CUT break down and do a semi descent job of polishing (without polishing)? How did you apply the WG sealant?

[DeansDetailing]

No dullness...it finishes very well...close to Wolgang Uber Compound if you've used that. See my post on the F150...that is black and I used HD CUT on it too.

WGDGPS applied via LC Red pad...thin but consistent application. After I finished applying, I allowed 45min-60min before wiping off with a Junior Super Plush towel.

Yeah...white and flat silvers..

[WaxMaster1]

No dullness...it finishes very well...close to Wolgang Uber Compound if you've used that. See my post on the F150...that is black and I used HD CUT on it too.

WGDGPS applied via LC Red pad...thin but consistent application. After I finished applying, I allowed 45min-60min before wiping off with a Junior Super Plush towel.

Yeah...white and flat silvers..

Ok. Thanks. I have a bottle of cut that I don't have a need for right now, but nice to know how it finishes out just in case. I did see the F150....excellent as well.

[DeansDetailing]

I just picked up some HD ADAPT. Hoping for good results.