5 1/2 inch and 6 inch Buffing Pads - Pictures and Links

[Mike.Phillips@Autogeek]

5 1/2 inch and 6 inch Buffing Pads on Autogeek's Online Store


Lake Country

5.5" Flat Pads



The outer edge of the face of these pads is tapered so they are actually a little under 5" in diameter





Approximately 7/8" thick




5.5" CCS Pads



5.5" CCS Pad is right at 5.5" in diameter



Approximately 7/8" thick




5.5" Hydro-Tech Pads



5.5" Hydro-Tech pads are right at 5.5" in diameter



Approximately 1 1/4" thick




6" Kompressor Pads



The outer edge of the face of these pads is tapered so they are actually a little under 6" in diameter



Approximately 1 1/4" thick





6" Griot's Garage



6" Griot's Garage Pads are approximately 6 1/4" in diameter



Approximately 1" thick





6.5" Cobra Cross Groove Flex Pad



6.5" Cobra pads are tapered around the outer perimeter and measure approximately 6 1/4" in diameter



Approximately 1 1/4" thick




6.5" Meguiar's Pads



6.5" Meguiar's pads are slightly tapered around the outer perimeter and measure approximately 6 1/4" in diameter



Approximately 1 1/8" thick




5.5" Surbuf MicroFinger Pads
(For correction work only, must be followed with a foam pad for finishing)




Right on 5 1/2" in diameter



Approximately 3/4" thick




Products shown

Buffing Pads
5.5" Flat Pads
5.5" CCS Pads
5.5" Hydro-Tech Pads
6" Kompressor Pads
6" Griot's Garage
6.5" Cobra Cross Groove Flex Pad
6.5" Meguiar's Pads
5.5" Surbuf MicroFinger Pads


Master Link to all buffing pads

Matching Backing Plates - Pictures and Links


Dual Action Polishers
Porter Cable 7424XP
Griot's Garage 6" Random Orbital Polisher
Meguiar's G110v2



How To Video Resources
How To Remove Swirls, Scratches and Water Spots using a PC 7424XP, Meguiar's G110v2 or Griot's Garage 6" Random Orbital Polisher

Using a DA Polisher - Part 1

YouTube- How to remove swirls, scratches and...

Using a DA Polisher - Part 2

YouTube- How to remove swirls, scratches and...

Using a DA Polisher - Part 3

YouTube- How to remove swirls, scratches and...

Most Important...

Here's how to do a "Section Pass" when trying to remove swirls, scratches and other below surface paint defects.

How to do a Section Pass

YouTube - How to do a "Section Pass" with a...

Visit Autogeek's YouTube Channel for more YouTube Videos

How To Articles

The Definitive How-To Article for Removing Swirls, Scratches and Water Spots Using a Porter Cable 7424XP, G110v2 or Griot's Garage Polisher
Tips for working in warm/hot weather or direct sunlight
Proof You Can Do It! - Joe The Detailer - Black Porsche Turned into Black Pearl!
The Free Floating Spindle Assembly - The Story Behind The Story...
How much product do I use with my DA Polisher? -

[CEE DOG]

This is great Mike! I'm sure it'll be helpfull to a lot of people.

[CU2MIKE]

I have 1 question about the surbuff pads, do I clean them like how I clean my foam pads? With the DP pad rejuvenator and a brush?

[feslope]

Thank you Mike. Excellent compilation of useful info. No need to guess anymore.

[rohnramirez]

Thanks for sharing Mike, that is really helpful.

If i may suggest, kindly add a picture of the back as well showing how much the H&L velcro covers. Like for example, the 6" HTs have only 5.5" velcro and the 6" GG Pads cover the entire back of the pad.

[jayhkr]

This is great info for me Mike, thanks a lot!

[Bunky]

Isn't the contact area of a 5.5-in flat pad still greater than 5-in due to pad compression?

[hellzdragon]

What about the CCS 6.5 inch pads? I only ask because these pads come with a lot of the kits sold by AGO.

[Hellspawn]

For overall use with DUragloss 501/105, Ultimate Wax liquid and at most mild swirl removal and overall wax application, CCS or Flat Lake Country 5.5?