Detailers Domain - Uber

**dschribs** · 08-08-2009, 07:50 PM

Anyone use the 5.5: Uber pads from Detailers Domain??? You hear so much about LC it's almost like you don't want to pull the trigger on any other brand...

**agpatel** · 08-08-2009, 07:55 PM

I love them, I dont like the CCS pads so I got the Ubers b/c they are the only flat face ones.

**loudog2** · 08-08-2009, 08:23 PM

Originally Posted by agpatel

I love them, I dont like the CCS pads so I got the Ubers b/c they are the only flat face ones.

AG sells LC flat pads also.
Lake Country Pads

**agpatel** · 08-08-2009, 08:25 PM

But 6.5 is useless on a DA, you need 5.5" to do any decent correction and LC does not have 5.5" flat pad anymore.

**loudog2** · 08-08-2009, 08:29 PM

Originally Posted by agpatel

But 6.5 is useless on a DA, you need 5.5" to do any decent correction and LC does not have 5.5" flat pad anymore.

Not all DA's. For the PC, true. They are fine for the flex.

**ScottB** · 08-09-2009, 04:54 AM

The larger pads work well with Flex and new Griots buffer indeed.

**agpatel** · 08-09-2009, 09:17 AM

Originally Posted by loudog2

Not all DA's. For the PC, true. They are fine for the flex.

True, it just skipped my mind when I was writing that.

**BlkTAWS6** · 08-10-2009, 09:41 PM

why are the 6.5 no good for the PC?

**agpatel** · 08-11-2009, 12:00 AM

For the normal PC they are just to big to get enough heat in it to break down the polish. The sweet spot is in the center and with a 6.5" pad is smaller than that of a 5.5" as you are rotating less weight around, thus you will get better performance and cutting ability out of a smaller pad than larger. It seems that 5.5" was about the max a org. PC could go to before decreasing performance.

**Bunky** · 08-11-2009, 06:47 AM

My UDM can handle the Meg's Soft Buff 2.0 pads (7-in) without much issue.

saw a video yesterday with a guy buffing at speed 3 with a PC and it sure seems underpowered compared to a UDM. I have never used a PC so cannot speak first hand.