Thanks: 0
Likes: 0
Dislikes: 0
-
Super Member
Re: pad cleaning
Originally Posted by termigator
Thanks for the offer Jay. I would love to get the Grit Guard, but financially it's just not in the cards right now. That's a big snook BTW. How big?
Four dinners for two big! LOL! (Actually I don't remember the size of the snook. Probably should update my avatar!)
-
Re: pad cleaning
I assume using one pad for an entire car is bad. With that in mind how often should I clean the pad while detailing? Also how do I know when to clean it?
-
Super Member
Re: pad cleaning
Originally Posted by SgtDeckard
I assume using one pad for an entire car is bad. With that in mind how often should I clean the pad while detailing? Also how do I know when to clean it?
I ordered the grit gaurd pad washer. Should be here by the weekend. I have the same basic question. How do you know when or how often to you clean the pads? I assume that it differs depending on pad density and product being used. What I have been doing is changing pads after each panel.
How many buffing cycles are most of you completing before cleaning/changing pads? I am using CCS pads now. Plan to buy some flat pads next sale or BOGO.
Kevin
Griots Garage 6in ROP, 3in ROP, pneumatic 3in polisher
Flex 3401, Porter Cable PC7424 (the old non-XP model).
-
Re: pad cleaning
Originally Posted by SgtDeckard
I assume using one pad for an entire car is bad. With that in mind how often should I clean the pad while detailing? Also how do I know when to clean it?
Umm... not really, depends upon what you're doing. If I was cutting a car using a wool pad on a rotary I would use one pad for the entire cutting process as long as it wasn't worn out before I started in the first place.
If you're talking about using a foam pad on a Flex 3401 or a PC or a Cyclo, then it's going to be faster and a more efficient use of your time to have more pads for the heavy cleaning or correcting step.
How to tell when it's time to clean our pad?
If you look at the face of the pad and you see a build-up of spent product and removed paint, then it's time to clean the pad.
If you're working on finish that is severely neglected, then clean your pad often.
What is the definition of the word often?
- After each application of product
After every other application of product
I usually do the second option unless it's really hot outside and my pads are gunking-up easily and making the actual buffing process difficult.
Originally Posted by 5.4 Shelby
How do you know when or how often to you clean the pads?
Did the above help?
p.s.
Is gunking-up a word?
-
Super Member
Re: pad cleaning
Originally Posted by Mike.Phillips@Autogeek
Did the above help?
p.s.
Is gunking-up a word?
Yes and I think so.
I am not really seeing "gunking up" in the sense that there is a crust of product on the edges of the pad. The pad seems to start to drag a little. It doesn't even seem to be saturated. When I take it off the polisher, it gets a little built up product on the surface of the pad. I was actually doing 4 or 5 buffing cycles before changing pads. Now that I will have a pad cleaner (as of Thurs), I will clean every 2 or 3 buffing cycles.
Honestly that seems like a lot of cleaning, but, I will try it to see if the pads last a little longer.
Follow up question: How many cleanings before you change pads?
Kevin
Griots Garage 6in ROP, 3in ROP, pneumatic 3in polisher
Flex 3401, Porter Cable PC7424 (the old non-XP model).
-
Re: pad cleaning
Originally Posted by 5.4 Shelby
Yes and I think so.
I was actually doing 4 or 5 buffing cycles before changing pads. Now that I will have a pad cleaner (as of Thurs), I will clean every 2 or 3 buffing cycles.
Honestly that seems like a lot of cleaning, but, I will try it to see if the pads last a little longer.
Follow up question: How many cleanings before you change pads?
How often you clean you pad will really be specific to your buffing style and what you're working on and the product itself. The key thing to do is to turn your polisher over and look at the pad, if you see built up product on it then clean it off, or at least clean it to suit your style.
I was always taught to work clean and as a results I always promote that idea to others as it reduces all kinds of other problems. So just use good judgment and you'll find a protocol that works for you.
-
Super Member
Re: pad cleaning
Thanks Mike. Looking forward to playing with my new pad washer.
Kevin
Griots Garage 6in ROP, 3in ROP, pneumatic 3in polisher
Flex 3401, Porter Cable PC7424 (the old non-XP model).
Similar Threads
-
By RSAUTOSPA in forum Auto Detailing 101
Replies: 2
Last Post: 06-01-2020, 07:08 PM
-
By Mike Phillips in forum How to articles
Replies: 17
Last Post: 04-15-2020, 11:33 AM
-
By Mike Phillips in forum Ask your detailing questions!
Replies: 6
Last Post: 09-04-2019, 03:40 PM
-
By fightnews in forum Auto Detailing 101
Replies: 3
Last Post: 08-06-2017, 01:49 PM
-
By TotalNewbie in forum Wool & Foam Buffing Pads
Replies: 8
Last Post: 05-29-2013, 08:43 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks