Thanks: 0
Likes: 0
Dislikes: 0
-
Super Member
Re: WDGPS3.0 on Detailer
I wouldn't use any of those products on the WG DGPS. I would just ad another coat of WG and be done with it. All those products are basically sealants - and layering different sealants on top of each other really has no benefit.
Using V7 is fine, as its really just a glorified QD with some gloss enhancers. But, these days I tend not to use it because the stuff kills beading and hydrophobic water behavior or your LSP. It's not a bad product to use in the summer, but there are other spray waxes that will improve beading.
IMHO the more hydrophobic the surface remains, the easier it is to clean and it will generally stay cleaner longer.
-
Super Member
Re: WDGPS3.0 on Detailer
Originally Posted by IzzyMan12078
The car looks fantastic and the surface now is so smooth, better than anything I've felt before.
I currently have one layer of WDGPS. As I mentioned in my post, I had planned to top this with CG V07, and then Meg UPW. After doing some more reading, I am not sure what I should do.
I read that Meg s UPW or ULW are really sealants, and the solvent in them could mess with the WDGPS?? The more I read about the CG V07, the more I realize its a sealant. I knew the marketing said it was, but it seemed more like a QD to me.
Any advice? Will the Meg Ultimate products be OK on top of the Wolfgang? I'll skip the V07 for now. I don't really own any pure caranuba waxes. I was hoping this could be my only and last detail with a strip/sealant before winter.
You will see the most benefit out of another coat of WDGPS. At least until you get a nice carnauba.
-
Re: WDGPS3.0 on Detailer
No experience with the Meg products you mentioned, but in the 6 years I've been using WDGPS, I've topped it with another coat of WDGPS, Souveran paste, Fuzion or OCW. Can't complain!
-
Newbie Member
Re: WDGPS3.0 on Detailer
I put a second layer of Wolfgang on. Thanks.
-
Re: WDGPS3.0 on Detailer
You will see the most benefit out of another coat of WDGPS
How long to wait between coats? I just put my first coat on, will wait an hour to buff off. However the bottle does not say how long to wait between coats.
Thanks,
Michael
-
Super Member
Re: WDGPS3.0 on Detailer
Originally Posted by Mjgillen
How long to wait between coats? I just put my first coat on, will wait an hour to buff off. However the bottle does not say how long to wait between coats.
Thanks,
Michael
I wait to apply another coat
of WDGPS for at least 12hrs.
It's also best to keep it from
being exposed to any type of
moisture during that 12 hours
of cure-time.
Bob
"Be wary of the man who urges an action in which he himself incurs no risk."
~Joaquin de Setanti
-
Similar Threads
-
By Mjgillen in forum Wolfgang Car Care
Replies: 14
Last Post: 09-14-2016, 09:54 PM
-
By JguzS4 in forum Ask your detailing questions!
Replies: 3
Last Post: 04-19-2015, 08:52 PM
-
By Evan.J in forum Product Reviews
Replies: 2
Last Post: 08-20-2014, 09:58 AM
-
By unclestu in forum Wolfgang Car Care
Replies: 16
Last Post: 10-07-2009, 07:20 PM
-
By unclestu in forum Wolfgang Car Care
Replies: 13
Last Post: 08-10-2009, 07:05 AM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks