Thanks: 0
Likes: 0
Dislikes: 0
-
Newbie Member
Wolfgang Trio Advice
Hello to all,
Today I received:
1 PC-7424XP1 - Porter Cable 7424XP Dual Action Polisher 129.99
1 WG-8900 - Wolfgang Total Swirl Remover Kit 129.99
1 OPT-ERA-F - Optimum Opti-Eraser – Fine Grade 19.99
1 SAMPLES - One Free Sample Per Order 0.00
1 W-67DA - 5 Inch Meguiar's Dual Action Backing Plate 19.99
1 FORUM15 - 15% savings -25.50
---------------------------------------------------------------------------
Sub-Total: 274.46
Tax: 19.21
Shipping & Handling: 0.00
---------------------------------------------------------------------------
TOTAL: 293.67
And I ordered this yesterday about 4:00 PM ET via the phone I live in Florida and AG is in Stuart.
My question is I have a 2005 Lincoln Town Car with Tri-coat paint it is camel/tan with metal flake that sparkles, the TC has 70,000+- miles and the paint is in very good shape with some light swirl marks but since its a light color you can see the swirls at night when the light reflects off of the car.
I'm going to wash with WG auto bathe 2 bucket of course,clay wash again blow dry,tape off moldings etc and do a test section 2x2.
I would appreciate any advice. Thank in advance
The Pig
-
Super Member
Re: Wolfgang Trio Advice
It looks like this kit contains 1 orange, 1 white, and 1 blue pad.
For a car that size, you are going to need a few more polishing pads (orange or white). I would suggest 4 pads minimum just for polishing if doing it in 2 steps. Otherwise, you will need to clean them often. Pads become less effective when they get dirty and that does not meet just wiping the residue off.
For the finishing step, I would consider at least 3 pads. I would have suggested the black finishing pads but the blues may work.
Be careful on work area. You can get better results on a smaller area (less than 2x2) especially with the Porter Cable.
-
Junior Member
Re: Wolfgang Trio Advice
I just did the hood of my red Jetta with the 3.0 swirl and 3.0 finishing glaze. I was wowed at the end result. But is there a certain setting on my 7424 HD I should have it on to apply these? Also just put a coat wax on top of it until my Blackfire sealant comes in a couple of days.
-
Super Member
Re: Wolfgang Trio Advice
Originally Posted by raswank
I just did the hood of my red Jetta with the 3.0 swirl and 3.0 finishing glaze. I was wowed at the end result. But is there a certain setting on my 7424 HD I should have it on to apply these? Also just put a coat wax on top of it until my Blackfire sealant comes in a couple of days.
Use the following guideline --> Speed setting 5-6 for TSR and 3-4 for FG and for wax application 1-2
Similar Threads
-
By addysdaddy in forum New Car Care Products
Replies: 3
Last Post: 11-02-2012, 04:06 PM
-
By Danube in forum Products Guides
Replies: 3
Last Post: 04-14-2012, 08:09 AM
-
By IID in forum Auto Detailing 101
Replies: 5
Last Post: 09-21-2010, 09:08 PM
-
By img in forum Show N' Shine
Replies: 3
Last Post: 09-14-2009, 06:23 PM
-
By Nick-Benz in forum Auto Detailing 101
Replies: 10
Last Post: 09-01-2008, 09:02 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks