Thanks: 0
Likes: 0
Dislikes: 0
-
Junior Member
A few rookie questions
I finally caved and bought a PC 7424xp as well as the wolfgang duo and some deep gloss paint sealant. This will be by first time working with a machine as well as these products. I've read through most of the articles and seen the videos for correct PC operation. Had a few questions about the products themselves.
First off, applying the sealant with the machine and a red pad. When I'm finished, with it being a non-water soluble product how do I go about getting the pad clean. I picked up some of the DP pad cleaner. Will this do the trick to get the sealant out?
Next up, do I need to wash the car in between the swirl removal and polish steps?
The kit I bought included a backing plate. In the online add it showed a yellow flexible plate. Mine came with a black backing plate that feels pretty stiff. Is there any difference aside from the color?
Lastly, The wolfgang kit I bought came with 6.5" pads, I keep reading that this is a very bad combo with the PC. Any tips to make it work as this is what came with the kit from AG
And thanks for bearing with all the rookie questions. Hopefully weather permitting I can get to the job in the next week or two.
-
Junior Member
I was in your spot a few
Months back. As for pads I would do as most here and order the 34.00 six pack of lake country flat pads size 5.5 with a new yellow 5.5 backing plate it's just less for the machine to work at and is an easier combo.
I too have the Wolfgang combo and the deep gloss sealant. I did have
An issue getting the sealant out of the blue pad it was super greasy and the pad cleaner didt seem to work. I was gonna toss the pad but washed Few more times and washed it again week later pads all good.
-
Super Member
Tip for wax and sealant pads... Throw them in a ziplock and only use then for that sealant.
-
Junior Member
Re: A few rookie questions
So after using a pad for the sealant, I can just zip lock it and use it again next time? The sealant wont harden or dry out in the pad over a few months?
Oh and nice bike motogoon, I ride a KTM 250 2-stroke
-
Super Member
That is correct. And no it won't dry out if the bag is sealed well.
-
Junior Member
Just an update. Was able to wash and clay today and get about half of the car done with the swirl remover. About 3hrs for half the car. Took me a while to feel comfortable Pleased so far. All the light scratches came out. Had an awfull patch on the roof where it looked like the previous owner dragged a box across the paint. Almost all of it came out. Took me quite a while to get the hang of the machine and right amount of product. I noticed the 6.5" pads suck. The machine bogs down quickly and the pads begin to vibrate alot due to the overhang. I think I'll be ordering some 5.5" pads at some point.
I do have one question though. Using the swirl remover I couldn't stop the damn stuff from dusting. Super fine light dusting every section I worked. Keep making a mess. Anyone else get this and know what to do about it?
-
Super Member
Re: A few rookie questions
But it will get black mold if left long enough.
Originally Posted by tw33k2514
That is correct. And no it won't dry out if the bag is sealed well.
-
Super Member
Re: A few rookie questions
Originally Posted by Rsurfer
But it will get black mold if left long enough.
How long before that happens? Longest ive left mine in a bag without using them was a week or so.
-
Super Member
Re: A few rookie questions
A week or two should be fine.
Originally Posted by tw33k2514
How long before that happens? Longest ive left mine in a bag without using them was a week or so.
Similar Threads
-
By Grifffx4 in forum Porter Cable 7424XP Dual Action Orbital Polisher
Replies: 31
Last Post: 05-06-2014, 08:09 AM
-
By wanabe detailer in forum Products Guides
Replies: 5
Last Post: 01-09-2013, 08:33 PM
-
By hulatee in forum Introduce Yourself
Replies: 16
Last Post: 12-27-2012, 03:36 PM
-
By Gturbine in forum Auto Detailing 101
Replies: 2
Last Post: 05-12-2009, 11:16 AM
-
By Steve Hall in forum Introduce Yourself
Replies: 5
Last Post: 10-31-2007, 08:59 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks