Thanks: 0
Likes: 0
Dislikes: 0
-
Super Member
Amount of time before buff off of wdgps3.0
I believe that the amount of time you must leave the wdgps on the car before you wipe it off is 45 minutes. Would there be any benefit to letting the product stay on the car for a longer period of time?
Also after the sealant has cured for at least 12 hours per coat and you than want to top it with a couple of coats of Fuzion how long do you wait between coats of the Fuzion?
Thanks
[SIGWe PIC][/SIGPIC]“
We are what we repeatedly do. Excellence, therefore, is not an act, but a habit. -Aristotle
MAY THE SHINE BE WITH YOU
-
SELF BANNED
Re: Amount of time before buff off of wdgps3.0
Originally Posted by unclestu
I believe that the amount of time you must leave the wdgps on the car before you wipe it off is 45 minutes. Would there be any benefit to letting the product stay on the car for a longer period of time?
Also after the sealant has cured for at least 12 hours per coat and you than want to top it with a couple of coats of Fuzion how long do you wait between coats of the Fuzion?
Thanks
I have always left the sealant on for longer than an hour before removing Stu. As far as seeing a difference , no I haven't. The rule of thumb is to let a nuba cure for 24 hours before adding a second coat.
-
Super Member
Re: Amount of time before buff off of wdgps3.0
What about in the sun when the car is hot?
-
SELF BANNED
Re: Amount of time before buff off of wdgps3.0
Originally Posted by SouthernStyles
What about in the sun when the car is hot?
Why would you apply anything in the sun?
-
Super Member
Re: Amount of time before buff off of wdgps3.0
Well i dont try to but somtimes it happens....
-
Re: Amount of time before buff off of wdgps3.0
Originally Posted by ASPHALT ROCKET
Why would you apply anything in the sun?
Some of us that operate mobile may not have access to a garage/car-port/shade tree on certain jobs. Sometimes all we have to work with is the area that the customer provides us.
Regardless though, I have a 20x20 portable canopy, so the only thing I really do in the sun is wash (drying done under the canopy)
-
Junior Member
Re: Amount of time before buff off of wdgps3.0
I let it sit at least 45 mins and if passes the swipe test I buff it out.
-
Re: Amount of time before buff off of wdgps3.0
yep I as well do 45 minutes, then a minimum of 12 hours before 1-2 coats of wax.
-
Super Member
Re: Amount of time before buff off of wdgps3.0
Originally Posted by ASPHALT ROCKET
I have always left the sealant on for longer than an hour before removing Stu. As far as seeing a difference , no I haven't. The rule of thumb is to let a nuba cure for 24 hours before adding a second coat.
Thanks for your feedback Dana and everyone else who replied to the question.
Dana or anyone else with a thought on this question,
Is it better to apply the Fuzion by hand or with my Flex 3401? I know that you must use only a thin coat and I was wondering if using the Flex will enable you to apply a thin coat more evenly.
[SIGWe PIC][/SIGPIC]“
We are what we repeatedly do. Excellence, therefore, is not an act, but a habit. -Aristotle
MAY THE SHINE BE WITH YOU
-
Super Member
Re: Amount of time before buff off of wdgps3.0
Originally Posted by unclestu
Is it better to apply the Fuzion by hand or with my Flex 3401? I know that you must use only a thin coat and I was wondering if using the Flex will enable you to apply a thin coat more evenly.
I would apply by hand.. One panel at a time, then remove.
Ed
Moderator/Consultant for Autogeek.net
To achieve excellence, excellence cannot be rushed. Technique is just as important as the product used.
While my approach takes more time, the results are far superior.
Similar Threads
-
By Bdubbs in forum Auto Detailing 101
Replies: 21
Last Post: 06-18-2020, 09:06 AM
-
By Mjgillen in forum Wolfgang Car Care
Replies: 14
Last Post: 09-14-2016, 09:54 PM
-
By IzzyMan12078 in forum Wolfgang Car Care
Replies: 16
Last Post: 09-02-2016, 03:46 PM
-
By kendra in forum Wet-Sanding, Cutting & Buffing
Replies: 9
Last Post: 09-15-2014, 08:32 AM
-
By Mark Preus in forum Ask your detailing questions!
Replies: 11
Last Post: 02-04-2010, 09:18 AM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
26 | 27 | 28 | 29 | 30 | 31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 | 5 | 6 |
|
Bookmarks