Thanks: 0
Likes: 0
Dislikes: 0
-
Re: Very poor results with Fuzion, bad pot?
Put Fuzion on a clean base, like after Klasse AIO and see what happens. Sounds like you didn't have a good wax bond, as for example I only have a coat of Duragloss AW on and had pollen on my truck for 3 days now with some sprinkler water also. I sprayed down it beaded like normal.
-
Super Member
Re: Very poor results with Fuzion, bad pot?
Originally Posted by Rsurfer
Could it be that the Dawn is leaving a film on your paint? I would use a paint cleaner or an IPA wipe down before waxing.
\\
I have been using my Brinkman Xenon lamp and one would not believe how little mf towels remove whatever the last step was (soap and polish). An IPA wipe down (50/50 for me) really makes the paint polish or soap free.
-
Super Member
Re: Very poor results with Fuzion, bad pot?
Please stop using Dawn in car care ...its not needed. Many commercial paint cleansers are available and you can even make your own IPA wipe.
Now back to your regularly scheduled post !
-
Re: Very poor results with Fuzion, bad pot?
Well, I have a bottle of lime prime lite that I have only used once. Did a nice job applied by hand, noticed no difference in feel of paint. But that is just by a human hand, I did not get to deep in the inspection. I may pick up some of the Wolfgang Paintwork Polish Enhancer, and give it a go. Just dang, another $20 to my already large cost of the fuzion. For the price, that product should be tossed in!!!
Dawn is back under the sink and will not be used again. I may strip all with prep-all. Then try to Lime Prime Lite. Apply the Fuzion twice and see what happens. If I get the same results, I will be offering samples to see if anyone else gets the same results.
Just upset with the results... Enjoy Mothers Day!
-
Super Member
Re: Very poor results with Fuzion, bad pot?
Originally Posted by Dwayne
Or even better, polished Wolfgang Paintwork Polish Enhancer. This product is awesome for prepping the surface and getting the best bond when you are applying Fuzion or Deep Gloss Paint Sealant 3.0. Our chemist designed these products to work best when used together.
and this time try not waxing in the sun.
-
Super Member
Re: Very poor results with Fuzion, bad pot?
Dont rule out P21S Paint Cleanser.
Cleanse your paint and try again. Wax on Wax off.
-
Re: Very poor results with Fuzion, bad pot?
Subscribed!...Wonder how this will turn out since I just got a tub of Fuzion as well...
-
Junior Member
Re: Very poor results with Fuzion, bad pot?
Originally Posted by HMFIC
Dont rule out P21S Paint Cleanser.
Cleanse your paint and try again. Wax on Wax off.
I used P21S Paint Cleanser before applying Wolfgang 3.0 today. It works very well removing the stains, gunk and old Zaino off of the paint.
Similar Threads
-
By RMarkJr in forum Ask your detailing questions!
Replies: 17
Last Post: 03-09-2017, 05:37 PM
-
By trusaleen1 in forum Ask your detailing questions!
Replies: 19
Last Post: 04-02-2015, 01:43 PM
-
By Nick B in forum Auto Detailing 101
Replies: 22
Last Post: 08-08-2011, 09:37 AM
-
By Soulman1980 in forum Ask your detailing questions!
Replies: 32
Last Post: 07-11-2011, 10:19 PM
-
By alowe in forum Wolfgang Car Care
Replies: 41
Last Post: 05-27-2010, 07:28 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
28 | 29 | 30 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
| 1 |
|
Bookmarks