Thanks: 0
Likes: 0
Dislikes: 0
-
Super Member
3" sanding disks
i purchased the 3M headlight restoration kit at the local store and it is IMPOSSIBLE to find 3" sanding disks like the ones that come with the kit. i am not going to buy another kit for 15 bucks and only get a few pieces and another 3" buffing pad and attachment. you guys should carry these!!!1
here is a link to the only place i could find that carries the 500, 800, and 3000 foam, sanding disks.
you guys should carry these, i am getting ready to order a pack of all 3!!!!!! prolly go 500 - 1000 - 3000
3" (Solid)
I LOVE my 3M headlight Resto Kit Polishing Pad ALL the time on motorcycle plastics, smaller areas on cars, i use my Menzerna SIP and Super Finish with the pad, but usually just the Super Finish. Works on friends and family cars when they have long scuffs or lighter-medium scratches in there clear coat. Its an easy way to make money. i keep it in my car with my drill all day every day. charge people like 10 bucks to do small things, adds up quick. i use that money for gas!! lol
Last edited by ICEMAN; 10-02-2009 at 09:12 PM.
17 Tucson | 2015 Mustang Ecoboost Premium PP | 89 Kawasaki Ninja ZX-10
@TheRealPolisher on FaceBook | @green2kgt on IG
-
Super Member
Re: 3" sanding disks
i just got in the 800 grit 50pk and the 3000 grit 20pk. we'll see if they last as long as the 3M.
17 Tucson | 2015 Mustang Ecoboost Premium PP | 89 Kawasaki Ninja ZX-10
@TheRealPolisher on FaceBook | @green2kgt on IG
-
Re: 3" sanding disks
I have been looking at these for a while now. I've never pulled the trigger on an order though. Have you gotten a chance to try them out?
-
Super Member
Re: 3" sanding disks
Guessing this signifcantly reduces headlight resotaration jobs?
-
Super Member
Re: 3" sanding disks
Originally Posted by SoCalEuro
I have been looking at these for a while now. I've never pulled the trigger on an order though. Have you gotten a chance to try them out?
not yet... hopefully this weekend!!! but for 30 bucks shipped for the 800 and 3000, even if they arent as good, i will still get a lot more done compared to the 15-20 bucks youll spend on the 3M kit. (but you need to buy the 3M kit first to get the drill attachments and 3" buff pad, which is VERY nice) The 3M kit comes with a few 500, few 800, and one 3000 grit. the 3M 3000 grit lasted me thru 3 seta of headlights, the 3M 500 grit usually last one pair per disk, sme with 3M 800 grit.
Originally Posted by Da Fats
Guessing this signifcantly reduces headlight resotaration jobs?
sanding is mainly needed for the BAD headlights. for the not so bad, i use my Meguiers kit. Has a yellow buffer drill attachment.
The 500-800-3000 grit, then Plastix with 3" orange pad (comes in 3M headlight kit) is a nice process for the very bad headlights. i use the 800 then 3000 on taillights sometimes, they usually never need the 500. Makes such a huge difference.
Last edited by ICEMAN; 10-15-2009 at 09:25 AM.
17 Tucson | 2015 Mustang Ecoboost Premium PP | 89 Kawasaki Ninja ZX-10
@TheRealPolisher on FaceBook | @green2kgt on IG
-
Super Member
Re: 3" sanding disks
Originally Posted by ICEMAN
not yet... hopefully this weekend!!! but for 30 bucks shipped for the 800 and 3000, even if they arent as good, i will still get a lot more done compared to the 15-20 bucks youll spend on the 3M kit. (but you need to buy the 3M kit first to get the drill attachments and 3" buff pad, which is VERY nice) The 3M kit comes with a few 500, few 800, and one 3000 grit. the 3M 3000 grit lasted me thru 3 seta of headlights, the 3M 500 grit usually last one pair per disk, sme with 3M 800 grit.
sanding is mainly needed for the BAD headlights. for the not so bad, i use my Meguiers kit. Has a yellow buffer drill attachment.
The 500-800-3000 grit, then Plastix with 3" orange pad (comes in 3M headlight kit) is a nice process for the very bad headlights. i use the 800 then 3000 on taillights sometimes, they usually never need the 500. Makes such a huge difference.
Great review ICEMAN...
I just purchased one of these kits and was wondering how everyone used them once the headlight resto was done that they bought it for.
DLB
-
Super Member
Re: 3" sanding disks
Originally Posted by Dalton Blevins
Great review ICEMAN...
I just purchased one of these kits and was wondering how everyone used them once the headlight resto was done that they bought it for.
DLB
thanks. i use the 3" orange pad with my Menzerna polishes on small spots and touch ups on cars!!! i can do everything wet sand to polish in a parking lot, with a drill, water, and some polish!! easy way to make a few extra bucks!!! i bought another 3M kit, just to have another orange pad and the other drill attachment.
17 Tucson | 2015 Mustang Ecoboost Premium PP | 89 Kawasaki Ninja ZX-10
@TheRealPolisher on FaceBook | @green2kgt on IG
-
Super Member
Re: 3" sanding disks
Originally Posted by ICEMAN
not yet... hopefully this weekend!!! but for 30 bucks shipped for the 800 and 3000, even if they arent as good, i will still get a lot more done compared to the 15-20 bucks youll spend on the 3M kit. (but you need to buy the 3M kit first to get the drill attachments and 3" buff pad, which is VERY nice) The 3M kit comes with a few 500, few 800, and one 3000 grit. the 3M 3000 grit lasted me thru 3 seta of headlights, the 3M 500 grit usually last one pair per disk, sme with 3M 800 grit.
sanding is mainly needed for the BAD headlights. for the not so bad, i use my Meguiers kit. Has a yellow buffer drill attachment.
The 500-800-3000 grit, then Plastix with 3" orange pad (comes in 3M headlight kit) is a nice process for the very bad headlights. i use the 800 then 3000 on taillights sometimes, they usually never need the 500. Makes such a huge difference.
As in bad your talking about the textured issue that does not respond to org or yellow pads with abbrasive polishes? I got a couple cars with those to worry about but I also jsut learned I need a rotary to really take care of the wetsanding marks also
-
Super Member
Re: 3" sanding disks
Originally Posted by Da Fats
As in bad your talking about the textured issue that does not respond to org or yellow pads with abbrasive polishes? I got a couple cars with those to worry about but I also jsut learned I need a rotary to really take care of the wetsanding marks also
right. Polishes usually dont help the BAD headlights at all. By bad, i mean ones that are so oxidized you can see inside them at all.
17 Tucson | 2015 Mustang Ecoboost Premium PP | 89 Kawasaki Ninja ZX-10
@TheRealPolisher on FaceBook | @green2kgt on IG
-
Super Member
Re: 3" sanding disks
update...
i have used the 3000 grit pads a lot lately and they are very nice. One piece has lasted thru half my truck and still kickin, i am using it after i peel off the vinyl pin stripe.
17 Tucson | 2015 Mustang Ecoboost Premium PP | 89 Kawasaki Ninja ZX-10
@TheRealPolisher on FaceBook | @green2kgt on IG
Similar Threads
-
By snj1013 in forum Porter Cable 7424XP Dual Action Orbital Polisher
Replies: 3
Last Post: 11-29-2016, 09:40 AM
-
By KoshiL in forum Show N' Shine
Replies: 11
Last Post: 05-29-2014, 01:02 PM
-
By Mindflux in forum Wet-Sanding, Cutting & Buffing
Replies: 4
Last Post: 06-09-2010, 11:48 AM
-
By oldmodman in forum Auto Detailing 101
Replies: 0
Last Post: 01-29-2010, 11:22 PM
-
By RaskyR1 in forum Wet-Sanding, Cutting & Buffing
Replies: 2
Last Post: 09-03-2009, 09:28 AM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks