Thanks: 0
Dislikes: 0
-
Super Member
Polish wipe down quick question
So frustrating after searches not being able to find the answer to a question I know is out there
Anyway, as you wipe down after polishing an area what do you use? IPA, Mineral Spirits, etc? Are these solvents the mainstay everyone uses or are they too harsh to use throughout the polishing process
-
Re: Polish wipe down quick question
I use to use 50/50 alcohol with distilled water. But I switched over to Eraser. A product CarPro puts out.
I find it has more lubrication than a IPA. Lots of companies make products for removing polish oils and paint prep.
-
Super Member
Re: Polish wipe down quick question
Interesting thought. I just use a dry towel. Is that wrong?
Sent from my iPhone using AGOnline
-
Re: Polish wipe down quick question
I too used to use the IPA mixture but have since switched over to a product (Eraser) designed for this purpose.
-
Super Member
Re: Polish wipe down quick question
For me it depends on what LSP I'm going to apply.
If I'm going to put down a wax or sealant, I don't do any post-polish wipe down. I'll simply buff off the polish and go straight to the LSP. For coatings I'll use a paint prep. The only one I've tried so far is Blackfire's Paint Prep.
-
Super Member
Re: Polish wipe down quick question
Use a dry mf towel. If it doesn't come off with just a little-moderate pressure on the towel. Don't press any harder, use a spritz of 50/50 water and ipa mixed and it'll come right off
Sent from my Nexus 5 using Autogeekonline mobile app
-
Re: Polish wipe down quick question
Gtehniq Panel wipe is BAR NONE the best inspection/wipe down product I've ever used. It has more lubricity than CarPro Eraser, Optimum Paint Prep, Gyeon Paint Prep and does not streak!! This is one product I will never change!
IPA(even when diluted with water) is way too grabby and can micro-marr the finish.
Originally Posted by Desertnate
If I'm going to put down a wax or sealant, I don't do any post-polish wipe down. I'll simply buff off the polish and go straight to the LSP.
Not a good idea, as polishes will fill micro-marring and you're not getting the true finish. At least do a test spot and use a panel wipe to remove polishing oils and hope the rest of the car has the same paint system. I do one test spot with panel wipe on every panel to make sure I'm getting the finish desired.
-
Super Member
Re: Polish wipe down quick question
That's an issue I see often that I can't get all the polish off so when I bring that portion of the car in the sun can't tell if holograms are real or just the polish. Will try IPA/water mixture this weekend and next time I place an order, will try Gtehniq. Think I have a bottle of Eraser in the basement, will try it too. Thanks all!
-
Super Member
Re: Polish wipe down quick question
Originally Posted by WRAPT C5Z06
Gtehniq Panel wipe is BAR NONE the best inspection/wipe down product I've ever used. It has more lubricity than CarPro Eraser, Optimum Paint Prep, Gyeon Paint Prep and does not streak!! This is one product I will never change!
IPA(even when diluted with water) is way too grabby and can micro-marr the finish.
I agree, I have used on glass to see how clean it wipes even. I liked it so much on the 1st order I made after my 1st use of it I got the 5l.
-
Re: Polish wipe down quick question
Originally Posted by YankeeFan
That's an issue I see often that I can't get all the polish off so when I bring that portion of the car in the sun can't tell if holograms are real or just the polish. Will try IPA/water mixture this weekend and next time I place an order, will try Gtehniq. Think I have a bottle of Eraser in the basement, will try it too. Thanks all!
Beyond that, even if you pull it out into the sun and you don't see residual polishing oils from wiping, most likely there's lubricating oils you can't see that are filling micro-marring. That will not be removed until you use a panel wipe, then you will have the true finish!!
Originally Posted by Ancient1
I agree, I have used on glass to see how clean it wipes even. I liked it so much on the 1st order I made after my 1st use of it I got the 5l.
NICE!!!!! I'm going to purchase a 5L of Gtechniq Panel Wipe once I finish the 500ml. Love this stuff!!
Similar Threads
-
By agarabaghi in forum Auto Detailing 101
Replies: 5
Last Post: 10-16-2018, 12:18 PM
-
By Rtrick87 in forum Auto Detailing 101
Replies: 2
Last Post: 08-22-2017, 01:31 AM
-
By DaC in forum Auto Detailing 101
Replies: 6
Last Post: 10-29-2012, 07:01 AM
-
By op1001 in forum Auto Detailing 101
Replies: 3
Last Post: 08-31-2012, 08:46 AM
-
By swanicyouth in forum Porter Cable 7424XP Dual Action Orbital Polisher
Replies: 1
Last Post: 04-07-2012, 03:46 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
28 | 29 | 30 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
| 1 |
|
Bookmarks