Rubber on door sill

[2007M6]

What would be the best way to handle the rubber inside the door? I've seen dust and dirt sometimes inside the crevice.

1. Wipe with a interior cleaner?
2. Clean with waterless wash?
3. Then dress with a vrp?

That's just my guess. Thanks in advance.

[Mike@DedicatedPerfection]

Use a light application of an interior cleaner on a mf towel.

You can re dress the area with a rubber dressing. 1z Gummi Pflege is great for this.

[A-train]

For mildly a light APC or cleaner would be fine. Any rubber protectant that can soften up the rubber will work. IZ gummi pfledge would work good too.

[Old Tiger]

Clean with Ultima Interior Shampoo Gel or 1Z Cockpit Cleaner. My favorite is CarPro PERL. Second is Duragloss 531.

[Kevin Cullen]

If I am going to clean the interior anyway and don't mind a little water inside I turn my pressure washer pressure down way low and use that to clean the area or hold my water hose spray nozzle real close and gently squeeze the trigger just abit to get a little water to come out.

If it is just a touch up I will use rinseless wash in a trigger bottle, wipedown and then reapply protection.

[allenk4]

+1 Gummi

[2007M6]

Just added to my cart. I never tried it. Thanks!

[Hazcat]

I use my lower wash mitt when I'm washing down low. I just open the door and wash it and around the bottom of the door and anywhere in there that's filthy. You can use about anything to dress the rubber but I just got my bottle of IZ gummi pfledge delivered by UPS today.

[Ncs0816]

Meg's rubber and vinyl cleaner. I think it's number 41

[GettingStarted]

The gummi pflege is pretty cool, recently got mine in today and the smell is pretty nice as well as the conditioning effect.