Can anybody give me any suggestions on taking yellow road paint off my car? Preferably something clear coat safe and easy? But I'll take any suggestions and I'll post pics in a few. Thanks guys!
Another option would be CarPro Tar-X. Either way, I would also use a plastic razor blade and clay to help break it down and help remove the paint from the surface. CarPro Tar X Tar & Adhesive Remover
Awesome guys thanks for the suggestions.. I have some plastic blades, I never thought about trying those to remove it from the surface. I'll post before and afters wen I work on it.
Reminds me of a time I drove over a small patch of fresh cement spillage on the highway and didn't realize it until the next day after it dried. It took me several days of claying to get that off. Degreaser was no help at all in my case.
I've had good luck with Xenit but here's the technique.
You need to DAMPEN a cloth and then hold the cloth against the road paint so the Xenit oils can go to work. The key is DWELL TIME. If you can keep a wet application of the Xenit against the paint long enough then you should be able to wipe the paint right off.
Thanks Mike and everyone else for the input.. I'm going to go ahead and order some XENIT and give it a try. And I would never go "wild man" with a razor blade in my hand, plastic or metal, hell even a rubber one (of they make em). I was gonna see (very carfully) if it would kinda peel/flake off. But I'm gonna leave it alone for now and wait to get some Xenit.
Bookmarks