Dislikes: 0
-
Re: NEW SONAX Cut & Finish - Extreme Showcar Makeover - Removing Holograms using the FLEX 3401
It was first introduced to me that night.I hope Ag gets the pics up to show the carnage of a rotary in the wrong hands.Havent played with it enough to answer your question.literally took me 5 minutes to fully correct a fender with this product.
-
Re: NEW SONAX Cut & Finish - Extreme Showcar Makeover - Removing Holograms using the FLEX 3401
Originally Posted by motion732
Not seeing any pics on here - is that just me?
Originally Posted by osiapstndp
The pictures don't load for me either. I tried with Tapatalk and the mobile Chrome browser.
Originally Posted by Desertnate
Me neither. I just thought they were being blocked by my network. Glad to know I'm not alone. I usually see all the images if they are hosted here. Other hosting sites are hit or miss.
Originally Posted by fightnews
there's is no pics for me either.
Originally Posted by WRAPT C5Z06
I'm not seeing any either.
Whoops....
The images were uploaded to the gallery but were private since I uploaded them before moving this thread from the Rough Draft forum group to the public forum. I moved this thread and 4 other threads out of the Rough Draft forum group to the public New Car Care Products forum group after SEMA started and the products became public knowledge but I forgot to change the setting in the gallery to enable the public to see the pictures.
My mistake.
Working at SEMA from a hotel room gets kind of hectic and thus I simply forgot that even though I can still see the pictures, regular forum members cannot see the pictures till I change the setting on the specific folder in my gallery for these images.
-
Re: NEW SONAX Cut & Finish - Extreme Showcar Makeover - Removing Holograms using the FLEX 3401
Originally Posted by fightnews
i don't want to sound disrespectful here but after reading the thread about the take over i feel like they're making you guys push sonax products.
i never heard anyone talking about them before in the last 5 months being on here. i was going to pick some up but now idk. hate to be a downer but thats how i feel, hope im wrong
Above where you used the word PUSH I would substitute the word SHOWCASE.
And "yes" Autogeek is now owned by Vision Investments but I was not "pushed" to use SONAX products for this car detailing project but instead chose to showcase the new SONAX Cut & Finish because it’s a new product being introduced to the U.S. market and also being introduced as a new product to the U.S. market at SEMA.
One of my job responsibilities here at Autogeek is to use new products and write reviews. I don't consider myself the best new product reviewer but I do my best. I do consider myself pretty good at writing how-to articles, as in articles that show you step-by-step how to use a product, pad or tool.
This is why when see my articles for new products they tend to start out saying,
NEW product review and how-to blank blank blank
I write both my review of the product but also include how to use it. (at least most of the time).
For what it's worth... I'm happy to showcase SONAX products because they are of the highest quality. The way I explain SONAX to the crowds that come to our Saturday Cars & Coffee car shows, which are predominantly older guys that "know" Mothers and Meguiar's brands but don't know the SONAX brand is I tell them in the same way that Meguiar's and Mothers have respected names and high quality products in the United States, SONAX has a respected name and high quality product in Germany and all of Europe.
In other words,
SONAX is the Meguiar's of Europe
This makes it easier for these guys to relate to this new-to-them brand. Because I recently flew to Germany and took a tour of the SONAX manufacturing plant and also was able to talk to and work with their chemists, I can assure you they do in fact have top shelf quality products that compete with the best of the best and in some cases exceed other brands.
Anyone that knows me, reads any of my how-to articles, watches any of my YouTube videos, attends our 3-day Competition Ready Detailing Classes or has seen our TV show Competition Ready, KNOWS one of the things I stress when it comes to the paint polishing aspect of car detailing, (I actually harp on this topic), is that the MOST IMPORTANT FACTOR when it comes to polishing paint is the ABRASIVE TECHNOLOGY and SONAX has GREAT abrasive technology.
It will consistently produce show car results on black paint without any of the negative issues like micro-marring, dusting, hard wipe-off, short buffing cycle you can and will find with some other brands. And if it works on black paint it will work on any color paint.
I test all compounds, polishes and cleaner/waxes, (the products that use abrasive technology), on black paint and SONAX products easily pass with flying colors. They also work on a wide spectrum of paints including very hard paints, very soft paints and everything in-between and I can't say that for all brands.
Best of all, I really only use and showcase products I like and trust and I like and trust SONAX.
Hope that helps and alleviates any of your doubts or fears of my sincerity, integrity or honesty when it comes to writing and sharing products I use to detail cars or products I write reviews and how-to articles about.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Re: NEW SONAX Cut & Finish - Extreme Showcar Makeover - Removing Holograms using the FLEX 3401
Originally Posted by GSKR
It was first introduced to me that night.
I hope Ag gets the pics up to show the carnage of a rotary in the wrong hands.
This pictures are now up...
Originally Posted by GSKR
literally took me 5 minutes to fully correct a fender with this product.
It truly is a very high quality compound/polish. I think it works great for anyone doing two-step paint details, as in
Step 1 - Machine polishing to remove defects.
Step 2 - Seal the paint.
-
Super Member
Re: NEW SONAX Cut & Finish - Extreme Showcar Makeover - Removing Holograms using the FLEX 3401
Mike
Did you have to prime the pad before using the product
Thank you
Adam
Sent from my iPad using Autogeekonline mobile app
-
Re: NEW SONAX Cut & Finish - Extreme Showcar Makeover - Removing Holograms using the FLEX 3401
Originally Posted by atgonzales
Mike
Did you have to prime the pad before using the product
Thank you
Adam
It's a good idea and I'd say priming a new clean dry pad is better than not priming the pad for effectiveness reasons when first starting with a fresh pad.
Most of the time now days I don't prime pads I just place some product onto the face of the pad then set the pad against a paint panel and smoosh it around then turn the polisher on and go to town...
-
Super Member
Re: NEW SONAX Cut & Finish - Extreme Showcar Makeover - Removing Holograms using the FLEX 3401
Thanks, Mike! The pictures really put the write up into context...and the car looks amazing!
I'm really liking the idea of some of these polishes that are fairly aggressive, yet finish out LSP ready. As the owner of a black German car with really hard paint, anything that allows me to do an annual touch up in one step vs. two is a winner in my book.
-
Super Member
Re: NEW SONAX Cut & Finish - Extreme Showcar Makeover - Removing Holograms using the FLEX 3401
Silly little question about doing the test spot:
If testing different products with an orange pad (or any color or type of pad) do you switch pads along with the different products used to compound or polish?
Always keep the shine in your life.
-
Super Member
Re: NEW SONAX Cut & Finish - Extreme Showcar Makeover - Removing Holograms using the FLEX 3401
Originally Posted by runrun411
Silly little question about doing the test spot:
If testing different products with an orange pad (or any color or type of pad) do you switch pads along with the different products used to compound or polish?
I do switch up to a fresh pad when moving to a different product while testing. I feel if I don't go to a clean pad and start mixing products, you'll never really know if it is the new product or some combination of the one you just tested and the new one. Fortunately, my product inventory is pretty small, and it never takes more than a couple tests to dial in the right combo.
-
Re: NEW SONAX Cut & Finish - Extreme Showcar Makeover - Removing Holograms using the FLEX 3401
Originally Posted by runrun411
Silly little question about doing the test spot:
If testing different products with an orange pad (or any color or type of pad) do you switch pads along with the different products used to compound or polish?
In a perfect world the answer is YES.
The true test is testing the product to be used with the pad to be used for the process.
Using a used pad, already contaminated with a previously tested product will skew your results.
For this project I tested a white foam polishing pad to avoid any residual marring issues caused by too aggressive of a pad.
See what I wrote here,
How to choose and use a one-step cleaner/wax by Mike Phillips
This part....
Originally Posted by Mike Phillips
Your goal
When doing a one-step, your goal is to use the least aggressive cleaner/wax possible to get the job done because even when using high quality products, pads, tools and techniques, there’s always the risk of leaving micro-marring in the paint.
The secret to successfully doing one-steps
The secret to using a one-step cleaner/ wax without micro-marring the paint is to use the softest foam pad you can get away with. When I say,
Use the softest foam pad you can get away with….
This means you need to do some testing with both your cleaner/wax and some soft foam polishing or waxing pads and test to see if your softest pad will leave behind a clear, shiny finish without micro-marring or hazing the paint. This means you need to have a selection of soft pads in your pad collection.
Similar Threads
-
By Mike Phillips in forum Show N' Shine
Replies: 67
Last Post: 04-25-2019, 07:06 AM
-
By Mike Phillips in forum PICTURES: Wednesday Night Detailing Classes
Replies: 29
Last Post: 03-09-2016, 08:26 AM
-
By Mike Phillips in forum PICTURES: 3-Day CAR Detailing Bootcamp Classes
Replies: 6
Last Post: 08-13-2015, 01:08 PM
-
By dpope in forum Ask your detailing questions!
Replies: 5
Last Post: 05-22-2013, 02:22 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks