One More Mezerna Question

[Excessive Detail]

I know this topic has been talked about to death, still I'm a little confused with so many Menerna choices, Out of these list of compound and polishes, which should I get to do both ceramic and non ceramic clearcotes:

Super Intense Polish
Intense Polish
Nano Polish
Final Polish
PO85RD

What would be the best combo that would work well on any paint surfaces? I already have Power Gloss and I am set on that for very bad paint, but I'm loking for a good setup for moderately bad paint.

Thanks guys.

[blk45]

SIP and Nano are designed for Ceramiclear, but work perfectly fine for regular clear coats. They would be your best options.

[shuskan3]

SIP and Nano are designed for Ceramiclear, but work perfectly fine for regular clear coats. They would be your best options.

PO85RD is also designed for Ceramiclear!

[MoBenzOwner]

SIP and Nano are designed for Ceramiclear, but work perfectly fine for regular clear coats. They would be your best options.

[blk45]

PO85RD is also designed for Ceramiclear!

But it's not needed if you have Nano, and Nano is more versatile.

[ASPHALT ROCKET]

Sip and 85rd is what you need. Also nano is not made to be an all in one like people are using it for. Sip/orange pad combo then go to 85rd and green pad and you will achieve great results, even better if a rotary is used.

[zaxjax]

I have SIP, IP, Nano and Final Finish, so I covered in any situation.

[supercharged]

SIP and PO106FF are the best!

[jshillin]

Just get SIP and PO106FF

[richy]

Yet one more vote for SIP and Nano.