Two Black vehicles I did for Procom Racing

**RFrommann** · 02-11-2016, 02:29 AM

Did the Shelby for Procom Racing in preperation for car going up forsale.

dont recall which polish and sealant i used, but since white white mustang i posted seemed to be a hit, here's a black one i did!

**RFrommann** · 02-11-2016, 02:39 AM

Also did their "tow-rig" which is a 2015 dodge ram 3500.

I started with a foam bath/iron-x/clay
top passengerside bedrail recieved some M105 with a MF pad for some scratches
then went over entire truck with HD polish with orange pad
followed that with Essence on a black finishing pad
topped with reload

**SKorch630** · 02-11-2016, 07:39 PM

Dear lord that 3500 had to take forever.... Love the outcome of both vehicles though! Great job!!!

**RFrommann** · 02-11-2016, 08:00 PM

Originally Posted by SKorch630

Dear lord that 3500 had to take forever.... Love the outcome of both vehicles though! Great job!!!

under 10 hours for the truck, but i even did the roof.

gt500 took about 5 hours

**Ebg18t** · 02-11-2016, 09:33 PM

Nice work.

**RFrommann** · 02-11-2016, 10:35 PM

Originally Posted by Ebg18t

Nice work.

thank you!

**Phaze Automotive** · 02-12-2016, 11:00 PM

Awesome job, did you have to tape off the vinyl while you were working or just went over it with the machine?

**RFrommann** · 02-13-2016, 12:58 AM

Originally Posted by Phaze Automotive

Awesome job, did you have to tape off the vinyl while you were working or just went over it with the machine?

I went over it, and i used carpro eraser to make sure no build up around lettering took place.

I was cautious, and made sure that rotation of pad was going with the points of letters.

i've used this process on all vinyl lettering, and haven't had any issues yet, had this been a full correction i would've advised customer to remove them, and reinstall new ones afterwards.