Thanks: 0
Likes: 0
Dislikes: 0
-
Regular Member
61 Corvette & 996 Turbo - Pinnacle Auto Detail - CT
This 61 Corvette has been in the owner's family for two generations, was repainted approximately sixteen years ago and just had the engine (327 IIRC) refreshed before I detailed it. The repaint was of good quality; it had been wetsanded nearly flat and showed only a small amount of minor ripples in the body and other flaws, basically it's a very nice driver and not an all-out show car. After sixteen years the paint was as you would expect it to be; riddled with swirls and light scratches from years of wipe downs and also hard to correct. You can see in the before pictures that the paint didn't really glow in the sunlight and the finish was dulled significantly by the marring in the finish.
Pictures before beginning work:
DSC03517 by Pinnacle Auto Detail - CT, on Flickr
DSC03562 by Pinnacle Auto Detail - CT, on Flickr
DSC03560 by Pinnacle Auto Detail - CT, on Flickr
DSC03518 by Pinnacle Auto Detail - CT, on Flickr
DSC03519 by Pinnacle Auto Detail - CT, on Flickr
DSC03521 by Pinnacle Auto Detail - CT, on Flickr
DSC03526 by Pinnacle Auto Detail - CT, on Flickr
DSC03527 by Pinnacle Auto Detail - CT, on Flickr
DSC03556 by Pinnacle Auto Detail - CT, on Flickr
DSC03563 by Pinnacle Auto Detail - CT, on Flickr
Given the severity of the marring we decided to shoot for an 80+% correction rate to improve the gloss, depth and reflectivity of the paint while not going for perfection since the owner isn't obsessive about keeping the paint in pristine condition. Given the age of this car I used ONR to wash, making sure to keep excessive water out of any cracks or crevices. The paintwork was then clayed, all trim was taped off and I began identifying areas of the body where gaps and edges didn't align. Where panel heights differed I taped off edges and corrected one area, then taped the corrected area and moved onto a new panel to ensure that the edges were protected from over buffing. Correction was performed using the Rupes 21 & 75E polishers, with Optimum's MF cutting pads and a M101/D300 mix used for compounding work, followed by two stages of finishing via Lake Country Polishing and Finishing pads with HD Polish. Protection was provided by two coats of DoDo Juice Supernatural.
Some pics during the correction process:
DSC03620 by Pinnacle Auto Detail - CT, on Flickr
DSC03609 by Pinnacle Auto Detail - CT, on Flickr
DSC03652 by Pinnacle Auto Detail - CT, on Flickr
DSC03670 by Pinnacle Auto Detail - CT, on Flickr
DSC03680 by Pinnacle Auto Detail - CT, on Flickr
DSC03682 by Pinnacle Auto Detail - CT, on Flickr
DSC03687 by Pinnacle Auto Detail - CT, on Flickr
DSC03688 by Pinnacle Auto Detail - CT, on Flickr
DSC03690 by Pinnacle Auto Detail - CT, on Flickr
DSC03691 by Pinnacle Auto Detail - CT, on Flickr
DSC03692 by Pinnacle Auto Detail - CT, on Flickr
DSC03696 by Pinnacle Auto Detail - CT, on Flickr
DSC03699 by Pinnacle Auto Detail - CT, on Flickr
DSC03700 by Pinnacle Auto Detail - CT, on Flickr
DSC03703 by Pinnacle Auto Detail - CT, on Flickr
DSC03705 by Pinnacle Auto Detail - CT, on Flickr
DSC03712 by Pinnacle Auto Detail - CT, on Flickr
Close to 90% correction was achieved and the client was very happy. It was a beautiful car and fun to work on and see the improvement in appearance as the polishing process went on. Thanks for looking, as always, any comments and questions are welcome. (996 writeup in the next post).
Mike
Pinnacle Auto Detail- CT
-
Regular Member
Re: 61 Corvette & 996 Turbo - Pinnacle Auto Detail - CT
This 911 Turbo was previously owned by the owner of the 61 Vette, he drove it for a short time and then sold it to his father. The car had been in storage at his house over the winter and was mainly in need of an exterior detail. Given that the car is black, the paint is relatively soft and the owner isn't super picky we decided on a one-step correction. The car was washed with ONR, clayed, taped up and polished with the Rupes 21, HD Polish (great amount of correction on this soft paint and an excellent finish) and lake country foam finishing pads. Protection was provided by Optiseal and DoDo Juice Supernatural.
Before pics:
DSC03849 by Pinnacle Auto Detail - CT, on Flickr
DSC03862 by Pinnacle Auto Detail - CT, on Flickr
DSC03865 by Pinnacle Auto Detail - CT, on Flickr
DSC03869 by Pinnacle Auto Detail - CT, on Flickr
DSC03874 by Pinnacle Auto Detail - CT, on Flickr
DSC03895 by Pinnacle Auto Detail - CT, on Flickr
Wheel barrels hadn't been cleaned in quite some time:
DSC03890 by Pinnacle Auto Detail - CT, on Flickr
DSC03909 by Pinnacle Auto Detail - CT, on Flickr
Test spot revealing a nice amount of correction and a lot of metallic flake popping:
DSC03911 by Pinnacle Auto Detail - CT, on Flickr
DSC03925 by Pinnacle Auto Detail - CT, on Flickr
Afters:
DSC03965 by Pinnacle Auto Detail - CT, on Flickr
DSC03964 by Pinnacle Auto Detail - CT, on Flickr
DSC03966 by Pinnacle Auto Detail - CT, on Flickr
DSC03980 by Pinnacle Auto Detail - CT, on Flickr
Outside for some reflection shots:
DSC03951 by Pinnacle Auto Detail - CT, on Flickr
DSC03946 by Pinnacle Auto Detail - CT, on Flickr
DSC03942 by Pinnacle Auto Detail - CT, on Flickr
Wheels dialed in:
DSC03937 by Pinnacle Auto Detail - CT, on Flickr
DSC03934 by Pinnacle Auto Detail - CT, on Flickr
Thanks for looking!
Mike
Pinnacle Auto Detail - CT
-
Super Member
Re: 61 Corvette & 996 Turbo - Pinnacle Auto Detail - CT
Excellent work on both unique paintwork
-
Super Member
Re: 61 Corvette & 996 Turbo - Pinnacle Auto Detail - CT
Great, Great!, impeccable work and photography, thanks for sharing.
“Nature is pleased with simplicity. And nature is no dummy”
― Isaac Newton
-
Regular Member
Re: 61 Corvette & 996 Turbo - Pinnacle Auto Detail - CT
-
Super Member
Re: 61 Corvette & 996 Turbo - Pinnacle Auto Detail - CT
You nailed it on both vehicles
-
Regular Member
Re: 61 Corvette & 996 Turbo - Pinnacle Auto Detail - CT
-
Super Member
Re: 61 Corvette & 996 Turbo - Pinnacle Auto Detail - CT
Excellent job on these two vehicles. Btw, where are you located in ct, im very far south towards nyc
Bill 1234
2004 audi a6 quattro (traded).
2015 Ford Escape 2.0l ecoboost 4WD
-
Regular Member
Re: 61 Corvette & 996 Turbo - Pinnacle Auto Detail - CT
Originally Posted by Bill1234
Excellent job on these two vehicles. Btw, where are you located in ct, im very far south towards nyc
Thank you. I'm based out of Farmington but I travel all throughout CT doing mobile work.
Mike
-
Super Member
Re: 61 Corvette & 996 Turbo - Pinnacle Auto Detail - CT
Excellent job on both vehicles! They look outstanding
Similar Threads
-
By PinnacleAutoCT in forum Show N' Shine
Replies: 14
Last Post: 03-10-2019, 06:28 AM
-
By Jean-Claude in forum Show N' Shine
Replies: 77
Last Post: 01-30-2014, 09:57 AM
-
By AjNavo61490 in forum Show N' Shine
Replies: 16
Last Post: 08-16-2013, 12:14 PM
-
By Cosmin in forum Show N' Shine
Replies: 3
Last Post: 08-21-2011, 05:28 AM
-
By imageautodetail in forum Show N' Shine
Replies: 10
Last Post: 02-09-2008, 09:30 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks