Ford Fiesta 21 hours paint correction - CQuartz

[javip2k]

The condition of this Ford Fiesta was rough on the outside with some water spots, hood heavy swirls, scratches, and general swirls.

Products Used:

SONAX Gloss Shampoo Concentrate
Masking Tape
Klasse High Gloss Sealant Glaze
CG Blue Guard II Premium Dressing
5 1/2" Buff and Shine Microfiber Cutting Pads
Flex XC 3401 VRG DA
Iron X
CarPro Fixer
CarPro Eraser
CQuartz
Klasse High Gloss Sealant Glaze
CG Blue Guard II Premium Dressing

Test spot




Wash and decon
Wheels and tires cleaned up and protected. We cleaned them up with Iron X and then polished including barrels. They were coated using Klasse High Gloss Sealant Glaze. Tires were dressed with CG Blue Guard II Premium Dressing.




















Wheels coated and ready to be reinstalled






The wheels wells also cleaned up




Outstanding change!




Paint decon
Ferrous particles presence at rear bumper and trunk






Tail lights corrected




Taped and ready to start correction


















Correction paint process
All paint was corrected, all hood, trunk and vertical panels swirls and scratches were removed










Another proud Ford owner. My good friend Luis Carlos, thank you very much for your valuable help.


The car was coated with CQuartz after finish paint correction, during this process no pic was shooted. Until the next morning the vehicle was taken out the garage. Note reflections
























Special thanks to Wills Windows and Wheels Detailing - Arizona's Premier Auto Detailers - for tips and tricks CQuartz application and cure time.

This project takes two days and a total of 21 hours. Any comments are welcome

[281]

Amazing work Javier! What did you use on the wheel wells? I actually just picked up some Fixer and from the looks of your pics, I can't wait to try it out!

[kochdalton87]

Nice work! The reflection shots are great!

[aztec1987]

Nice!!!! What did you use to knock off the break dust of the rims? Also for the wheel wells.

[Bob57]

Very impressive!

[Mike@DedicatedPerfection]

Amazing transformation! That blue paint screams with vibrancy now! You need sunglasses to look at it! Well done Javier!

[javip2k]

Amazing work Javier! What did you use on the wheel wells? I actually just picked up some Fixer and from the looks of your pics, I can't wait to try it out!

James, thank you for your comment. On the wheel wells I used a local production product, but is very like CG Bare Bones its finish is similar. Fixer is an easy product to use with great results, you will not regret using it.

[javip2k]

Nice!!!! What did you use to knock off the break dust of the rims? Also for the wheel wells.

Thank you, the rims and wheel wells were treated using Carpro IronX and on the wheel well finish I used a local production product, but is very like CG Bare Bones undercarriage spray

[javip2k]

Nice work! The reflection shots are great!

Thank you for reply

[aztec1987]

Thank you, the rims and wheel wells were treated using Carpro IronX and on the wheel well finish I used a local production product, but is very like CG Bare Bones undercarriage spray

I have the CG bare bones undercarriage spray but still haven't used it