2009 Bentley Continental - 2 Step Paint Correction by Mr. Sparkle Detailing - Long Island

[Gurge]

Client contacted me regarding a 2009 Bentley Continental that was just purchased from California and shipped cross country. It was dirty from transport and the owner hadn't really gotten a good look at the paint. We planned for a wash & wax assuming the paint was in good shape.

Pulled the car onto the wash mat and got started with the wheels. Sonax FE and various brushes to get the job done





After a high pressure rinse





Rinsed and then foamed the car to try and strip any old wax. CG Citrus Wash & Gloss, Dawn, and a bit of Optimum Power Clean







The usual 2 bucket wash with CG Citrus Wash Clear. Getting all the tight areas of course



Quickly clayed the car with Pinnacle Ultra Poly clay. I say quickly because very little was picked up.

Car was dried and evaluated under the LED lights. It wasn't pretty. Usual mix of swirls, deeper RIDS, oxidation, etc

A look at the hood



Closer




Contacted the client and discussed the situation. He was disappointed, but ultimately wanted it close to perfect. After some discussion of what we could do, we agreed to a 2 step paint correction. Goal was 90% correction or better all around.

Tried some different things, and eventually settled on a wide variety of polishes, pads and tools to get the job done. Wont reveal all my tricks but the jist was

Makita / Flex / Griots + 3m wool / 3m foam / Megs MF pads + Megs M100

then

Flex / Griots + LC white + Menz SF4000


Results as follows








And it goes a little something like this....

Before



After




Before





After





Before



After




Before



After




Protected with Blackfire Wet Diamond Sealant. Tires dressed with Poorboys Bold n Bright













That swirl free Bentley make you feel some type of way here in the Mr. Sparkle garage - Long Island NY


Mr. Sparkle Detailing.com

Instagram @MrSparkleDetailing

[HateSwirls]

Looks really good.
Was the paint very hard?
Which machine made the biggest impact?

Again looks great

[Gurge]

Looks really good.
Was the paint very hard?
Which machine made the biggest impact?

Again looks great

Thanks!

It was a bit on the hard side, but not terrible.

As expected the rotary offered the most / quickest correction. But I really only used that with an 8in pad on the larger panels. Everything else was either flex or griots

[Chris@AutoCleanse]

Beautiful work, the car made a complete 360. The before and afters tell the story. Now it is going to get all dirty in the New York snow LOL, thanks for posting and sharing.

[KS_Detailing]

Excellent work Something about a clean black car

[HybridInOrlando]

legit man, that looks really great!

[MarkB]

[mwoolfso]

Nice job Brian!

[Mike@DedicatedPerfection]

Very nice work. That black paint looks great!

[vet]

Great job! Nice car too!