'71 BMW 2002 Repaint, Wet Sanded and Polished

[Detailing by M]

Here we have a beautiful little BMW.
My customer fixes these up and sells them.
He had a bad Body Shop experience (I've never really heard of anyone having a good experience with a BS) with this repaint so he called on me to fix it up.

It had Orange Peel everywhere and waves along the body lines on the doors.

I had a little problem pulling out the 1500 grit sanding marks but with a little help from Stoops we figured it out.

I started with sanding with Meg's 1500 Unigrit 6" sanding disks on my G100
Then used Meg's Unigrit 2000 grit Sanding Block
and then Meg's Unigrit 3000 on my DA with the foam interface.

M105 on a MF cutting pad polished it up nicely and finished with D301 on a MF Finish pad.

The job took 16 man hrs in 90 degree heat.





Looks good!












After a short sanding I knew this was going to take some time to correct it properly




You have to have this sanding pad if you want to do it right.


The sanding pad helps get around the curves of this little cutie!




Also used 3" MF pad


The 6" interface pad


I love these little sanding blocks! They make the paint flat, very flat! Chip Foose uses these to sand a whole car!



And the end results. The sun was setting and it being a white car the pics don't doe it justice.
















Here's a good shot









Thanks to M. Stoop for his help. I always know I can count on him and Meguiar's to help me make others happy with there cars.

[Circa40]

Great job on a classic.

[Evan.J]

Stellar work Mario! Lots of sweat went into making that smooth finish. Thanks for sharing!

[JSou]

Incredible. Thanks for sharing.

[RedXray]

Nice work man!

Who every shot the BC/CC needs a refresher on gun air and fluid adjustments

[sproketser]

Top job on that BM ! Must have took days to do this job !

[Mike Phillips]

One word...


Incredible

[Setec Astronomy]

OMG that peel was horrible! I haven't seen a 2002 out here on the rust coast for about 30 years.

[Detailing by M]

One word...


Incredible

I learned how to wet sand this from you about 5 years ago.
Your a great teacher Mike and my hero.
Thanks to you I can do this kind of work.
Thank you!!!!!!

Top job on that BM ! Must have took days to do this job !

2 day about 18 hrs with breaks. 16 actully work hrs. It still needed another 8 hrs but this is what my customer paid for and he loved it.

[Mike@DedicatedPerfection]

Who every shot the BC/CC needs a refresher on gun air and fluid adjustments

No joke! That gun was way out of spec!

Nice work Mario.