Thanks: 0
Likes: 0
Dislikes: 0
-
Super Member
Re: Clear Coat Failure and Repair(with all pics)
Never mind, I see the picture that answered my question.
Just wanted to say again.... excellent work and documentation. Thank you for sharing with us all!
:dancebanana:
Sky's the Limit Car Care
-
Re: Clear Coat Failure and Repair(with all pics)
That really is a fantastic result. My concern would be that rattle-can clear seems to yellow pretty fast, since it's not a real catalyzed 2K clear. Of course, with the color of that car, you might not even notice any yellowing.
-
Super Member
Re: Clear Coat Failure and Repair(with all pics)
How fast does it typically yellow?
:dancebanana:
Sky's the Limit Car Care
-
Super Member
Re: Clear Coat Failure and Repair(with all pics)
Originally Posted by CEE DOG
How fast does it typically yellow?
Depends on UV exposure. In your Florida sun? I'd wager pretty fast.
That said, you CAN actually get 2K clear in a rattle can; just beware that any time you work with an isocyanate activated clear you need to take a lot more safety precautions. Also note that once you activate that product inside the can, it has a pot life of I think 48 hours after which point the whole can is no good anymore.
2K clear coat: Spraymax
-
Re: Clear Coat Failure and Repair(with all pics)
Originally Posted by Shiny Lil Detlr
That said, you CAN actually get 2K clear in a rattle can; just beware that any time you work with an isocyanate activated clear you need to take a lot more safety precautions.
Yeah, sorry, I wasn't meaning to imply that you can't get a rattle can of 2K clear, because I have learned on here that you can. I did a touchup on a curbed wheel and even got special wheel clear (at pep boys ) but a few years down the road it looks terrible.
And that's really important that you mention the isocyanates, that and the HF wheel acids are really things that people need to be careful with.
-
Super Member
Re: Clear Coat Failure and Repair(with all pics)
Wow thank you all for your kind words. I don't do many long posts like this it just takes so long. But to get a compliment from cee dog on documentation is humbling to say the least. Thank you. I never considered the yellowing factor just didn't know. But if it does, well, then maybe I'll just get the 2k clear and do it again since I've proven to myself that it can be done. Thanks for the heads up. I'll keep an eye on this to see how long it lasts and keep you guys posted. I haven't waxed over the area yet I wanted to make sure it was cured first. Anyone know how long I should wait given it's spay can clear does it cure faster?
-
Super Member
Re: Clear Coat Failure and Repair(with all pics)
Originally Posted by Rayaz
I have never done this but I watched a guy blend a panel before (I did stay in a Holliday Inn Express that night). This guy put the masking tape on and then pulled the top edge and attached the paper allowing it to fold over. He said this prevented a hard edge on the repair and feathered the seam between the existing paint and the repair. He called it back masking.....and I don't know where I was going with this.
Great job and great stones trying this in the first place. I think it turned out nice!
I've heard someone else mention back masking also and o think I will be trying it out on something because I really am curious to see the results.
You did a great job on the repair.
-
Super Member
Re: Clear Coat Failure and Repair(with all pics)
Thanks twister glad came back to see all th before pics. LoL
-
Re: Clear Coat Failure and Repair(with all pics)
Awesome job! Now that we can see the before and during pic's its even better. Well worth the time just to learn you can much less how great it turned out.
-
Super Member
Re: Clear Coat Failure and Repair(with all pics)
Interesting. I have clear that started chipping off after a rock hit it at highway speeds.
Think it could work here? These are older pics, I have since chipped off the loose clear, but its roughly the same size still.
Similar Threads
-
By Jacob Harrod AUTOCLEAN in forum Auto Detailing 101
Replies: 6
Last Post: 10-03-2020, 08:03 PM
-
By pman626 in forum Auto Detailing 101
Replies: 23
Last Post: 06-28-2016, 10:12 AM
-
By bob53 in forum Wet-Sanding, Cutting & Buffing
Replies: 2
Last Post: 06-11-2016, 03:42 PM
-
By St.LightDetails in forum How to Articles
Replies: 8
Last Post: 03-21-2015, 01:17 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks