Wheel Wednesday!

[Big Dave]

Like new!

First time I've tried this combo out on them. I find they're hazing up pretty quickly at the moment. In the past 6 months I've tried Collinite 845, 303 Touchless Sealant, 303 Graphene Nano Spray Coating, and Dodo Juice Iron Gloss. While they all offered protection, and ease of cleaning, the gloss doesn't last long and the haze reappears. I've had these wheels for 4 years now, and they are cheaply powder coated. I've still got Dodo Juice Blue Velvet I could try out, but I'm not going to buy a special wheel sealant just for these, and everything I've tried previously will be fine on the alloys when I switch them back on.

Sent from my motorola edge 20 fusion using Tapatalk

[Big Dave]

Tidied up the wheels on the Qashqai, they weren't bad so it was a wipe over with Ech2o, also topped up the Autoglym Instant Tyre Dressing, mainly for the passenger side. Also checked the pressures, all good. It might be time for a rotation, they haven't covered a lot of kilometres, but they've been on over a year.

Sent from my motorola edge 20 fusion using Tapatalk

[Eldorado2k]

Working on an older Chevy Silverado today. Chrome wheels, they’re hammered with stains.







0000 Steel Wool & plain water as lube.

[Coatingsarecrack]

Working on an older Chevy Silverado today. Chrome wheels, they’re hammered with stains.







0000 Steel Wool & plain water as lube.

Wow…. Night and day.


Sent from my iPhone using Tapatalk

[Big Dave]

I decided to do a tyre rotation on the Qashqai today, and of course it's an opportunity to get inside the wheels. I've never actually taken the wheels off this vehicle before, but this is its second set of tyres.

I worked on the insides first, the backs weren't bad, the fronts had more brake dust, but weirdly, all 4 had tar spray on the inside of the barrels. I used Turtle Wax Wheel and Tire cleaner first, as I said they weren't too bad and this moved the brake dust easily.

Then I broke out the Gyeon Q2M Tar to remove the tar sprays, which worked well, a bit surprised at that, I don't remember buying it, so I've probably had it on the shelf for over 5 years, I haven't used it, that I can remember, since we moved to our new home 4 years ago.

I then sprayed the wheels front and back with some 303 Touchless Sealant. And dried with a cheap MF.

I also discovered that the space saver spare only had 12.5 psi in it, it's supposed to be 60, it's never been used. The most frustrating part of today, getting all the little black plastic nut caps back on, is there a special trick to it that I'm not aware of?

Sent from my motorola edge 20 fusion using Tapatalk