Let's see you pressure washing station/setup or work in progres.

[craigdt]

Some very nice setups. I was just looking at some CR spotless water systems yesterday. I actually was about to start a thread about it.

I have many cars (6 mustangs and 2 daily drivers) and usually would wash them at a self carwash then finish it off at my shop.

My question is, can I purchase a CR spotless water system and just move it outside my shop when I want to wash a car? I have a water spigot outside.

Most of the time I use detail spray, but that doesn't work great on daily drivers, and I'd rather skip the self serve carwash and people when I can .

Thanks for any help!

Sent from my moto g power (2021) using Tapatalk

Yes!
Scroll up amd look at my setup.
My cr spotless is on the little wheelie cart it came on.
A bit more flexible than a wall mount, in case you need to move it.

I just grab my hose, walk over to the garage, hook it up to the cr spotless, and get to work.

The CR Spotless is probably a top 3 improvement item for me the last couple years. So nice

[Bdubbs]

Yes!
Scroll up amd look at my setup.
My cr spotless is on the little wheelie cart it came on.
A bit more flexible than a wall mount, in case you need to move it.

I just grab my hose, walk over to the garage, hook it up to the cr spotless, and get to work.

The CR Spotless is probably a top 3 improvement item for me the last couple years. So nice

Great too hear. Do you use a pressure washer, or just a garden hose? I do have a foam cannon, but haven't really used it yet.

I'm still researching this CR spotless, seems fairly straightforward.

Sent from my moto g power (2021) using Tapatalk

[briarpatch]

I needed a more flexible alternative to the wall mount, so I put together a cart.

[craigdt]

Great too hear. Do you use a pressure washer, or just a garden hose? I do have a foam cannon, but haven't really used it yet.

I'm still researching this CR spotless, seems fairly straightforward.

Sent from my moto g power (2021) using Tapatalk

Yep, pressure washer and foam cannon.

Look into the down tube conversion.
Basically, after you use up your first resin cartridges, you buy a set of $40 tubes that you install.
It let's you buy generic loose resin that is cheaper and lasts longer than the cartridge.

[Bdubbs]

Yep, pressure washer and foam cannon.

Look into the down tube conversion.
Basically, after you use up your first resin cartridges, you buy a set of $40 tubes that you install.
It let's you buy generic loose resin that is cheaper and lasts longer than the cartridge.

Much appreciated, I'll do some research.

Sent from my moto g power (2021) using Tapatalk

[DanaDetailingPros]

Had to ship my original reel back to CG I changed my mind on the stainless MTM but glad I’m going with the Cox in Blue of course


Sent from my iPhone using Autogeekonline mobile app

[Danube]

I need to take a photo of my Karcher 3.99, that's my pressure washing station.

[DanaDetailingPros]

Going nuts waiting for my Cox


Sent from my iPhone using Autogeekonline mobile app

[DanaDetailingPros]

Had issues with the pressure washer sliding. I searched just about everything to find a solution. I came across this bath mat that has suction cups on the bottom and the perfect texture for grip on the top. I couldn’t of found a more perfect solution! And it was only $10
Cox reel should arrive this week!


Sent from my iPhone using Autogeekonline mobile app

[DanaDetailingPros]

Finally the reel came today! I still have a plumber coming to bring water from the top! The pipe setup just was to Hoakie!


Sent from my iPhone using Autogeekonline mobile app