2020 Ford Transit

[Craig Encinitas]

How to make white work fleet vehicles look better?

(Work in progress)
-Foam down with a dilluted degreaser
-Pressure rinsed
-BlackFire Iron remover all over paint
-Pressure rinsed
-Foam w/ CarPro Reset and washed
-Pressure rinsed and left wet
-Porter Cable & Nanoskin Clay Disc
using ONR as lube
-Pressure rinsed
-Foamed with Reset and washed
-Pressure rinsed
-Dried



This is the best method I’ve tried yet.
One of my recent details I skipped a step and paid for it. Made the rest of the process very frustrating.

A one-step will most likely be used.
Fielder’s choice.
Anyone care to say what they would polish the vehicle with?

[Craig Encinitas]

TW Hybrid Solutions and LC Orange Light Cut pads for the win!



I’d forgotten how smooth and slippery this polish is. Perfect for this vehicle.
Topping it with their Ceramic Coat now.

[Craig Encinitas]

Well...it’s white. 🤷🏻#♂️







Final Thoughts: Turtle Wax Hybrid Solutions Ceramic Polish & Wax and the Ceramic Coat spray was a good choice.
I did the door jambs with the Ceramic Detail Spray. My good friend tells me to manage my expectations and to use appropriate products for each vehicle and customer requests.

Thanks for reading.

2020 Ford Transit Connect - YouTube

[Sizzle Chest]

Going to be the best looking vehicle in the fleet! Nice work...nice polishers too!!

[dgage]

How to make white work fleet vehicles look better?

I was going to say wrap it or repaint it but your methods work well too.

[BudgetPlan1]

Nicely done. Ford Transit vans (Race Red) are the bane of my existence but when ya have access to a fleet of them for testing stuff, gotta take what you can get. Nice flat panels though (for the most part). What did you use on the 800sq ft of plastic trim Ford slaps on these things?

[Craig Encinitas]

What did you use on the 800sq ft of plastic trim Ford slaps on these things?

On faded trim, TACsystem Moonlight.
For this trim, Optimum Poly Seal.
Also CarPro PERL on the weather stripping around the windows.

I’ll put Moonlight in the Pepsi Challenge any day of the week when it comes to faded trim. A wee-bit too toxic for my head yesterday on the Transit. I’ll use a painter’s mask next application.

[BudgetPlan1]

On faded trim, TACsystem Moonlight.
For this trim, Optimum Poly Seal.
Also CarPro PERL on the weather stripping around the windows.

I’ll put Moonlight in the Pepsi Challenge any day of the week when it comes to faded trim. A wee-bit too toxic for my head yesterday on the Transit. I’ll use a painter’s mask next application.

I have 3 new Transits coming in this month...and a bottle of Moonlight at home. I shall use it on the trim, thanks for the tip!

[Coatingsarecrack]

I have 3 new Transits coming in this month...and a bottle of Moonlight at home. I shall use it on the trim, thanks for the tip!

How old is your moon light budget? Craig yours too (shelflife)?


Sent from my iPhone using Tapatalk

[Craig Encinitas]

^
I’m near the bottom of the first bottle, which is over a year old. The second unopened one was purchased earlier this year. It’s very fluid, with no solidified matter inside. I saw that photo that someone posted awhile back, in which theirs solidified while in storage.

For coating a car, One Step Master is a much speedier application process. If you want to practice applying a high siO2 coating, Moonlight is for you. It has the consistency of molasses in winter. A little goes a long way. High spots are easily removed, even days or weeks later. A detail spray or light hand-polish rub.