Couple Ponys get prepped for winter Roush+GT

**Justin at Final Inspection** · 11-23-2018, 10:25 AM

Hey guys. Been a bit since I posted up. Still busy heading into winter months. Been doing a lot of basic details.

But had a father and son pair of Mustangs in to get cleaned up and ready for winter storage.

First up was a 13 5.0 GT/CS with a full Roush package. This cars white paint was trashed with only 27k miles and took a good bit of correction work to get it right.

Prep/Decon

Hyper wash, IGL Iron, nanoskin Medium towel

Wheels/tires

Mckees foaming wheel cleaner gel, LATA, Hyper dressing, hydro blue

Correction- About half of the car needed rotary work with my Flex Pe-14 and Rupes blue wool with M100. The rest got Rupes 21, Meguiars microfiber cutting pad and 3D one.

Finish polishing was with 3D ONE, Rupes 21 and Rupes yellow pad. Adams swirl killer mini was also used throughout the process.

LSP- IGL Premier sealant. He will be back for a more in depth coating job after he fixes his hood and front bumper.

Exhaust tips- Mckees fast metal polish and steel wool

Engine bay- LATA and hyper dressing

Next was this 45th anniversary GT with a cool glass panoramic roof.

Most of the detail was the same as above.

Correction- one step with Rupes 21, Rupes yellow pad and 3Done. Adams swirl killer mini was also used.

LsP IGL Premier.

The owner wanted the trim restored so Solution Finish was called upon. After curing I topped with IGL Poly ceramic coating to aid in longevity.

Not many pictures of this one.

**Sizzle Chest** · 11-23-2018, 11:11 AM

Knocked them out of the park! Nicely done. That white was beat! Great before pics!

**Eldorado2k** · 11-23-2018, 01:13 PM

Great job on those Mustangs. Really cool pic showing that streak of bleeding off the 5.0 badge.

What did you use to polish those black fins on the hood of the 1st car? The swirl killer? Or by hand?

**Justin at Final Inspection** · 11-23-2018, 05:00 PM

Originally Posted by Eldorado2k

Great job on those Mustangs. Really cool pic showing that streak of bleeding off the 5.0 badge.

What did you use to polish those black fins on the hood of the 1st car? The swirl killer? Or by hand?

Thanks bud. Oh man sorry. I used my Rupes ibrid with a 1in pad and 3D ONE

**Goonie75** · 11-23-2018, 05:46 PM

Originally Posted by Justin at Final Inspection

Thanks bud. Oh man sorry. I used my Rupes ibrid with a 1in pad and 3D ONE

Sweet work. Do you tend to use the d/a attachment or rotary attachment?

Sent from my SM-G965U using Autogeekonline mobile app

**Justin at Final Inspection** · 11-23-2018, 05:57 PM

Originally Posted by Goonie75

Sweet work. Do you tend to use the d/a attachment or rotary attachment?

Sent from my SM-G965U using Autogeekonline mobile app

Typically the DA 12mm attachment

**PaulMys** · 11-23-2018, 06:34 PM

Awesome job as always, Justin. Some damn nice Ponies there as well...........

**LSNAutoDetailing** · 11-23-2018, 08:53 PM

Nicely done Justin... Woah, that white GT was hammered.

**Aaryn NZ** · 11-24-2018, 01:09 AM

Nice Justin!

You're smashing it as usual my friend. Great work capturing the defects on camera, its not always real easy especially with lighter colours huh.

Go the PE-14!! I'm using Rotary power a bit more than usual lately, & I gotta say - I have kind of missed it a bit.

Super work here again buddy, great pictures, fantastic write up & stunning results! Thank you for sahring mate!

Aaryn NZ.