GMC - Rupes UHS

[TMQ]

Tough to go wrong with that combo.

That is what I turn to if the keramik/yellow microfiber leaves any haze, and I want a one step. I've also used Quarz on Yellow pads, but I still think UHS gives better gloss.

Agreed! Great one step if you do not want to go around car or huge truck 2 times doing compound and polishing steps.

Love this stuff big time...And huge time saver as well!

Tom

[JustJesus]

Nice to see test spots done, and a solution found.

Nice work on that truck, Tom.

[TMQ]

Great work! Seems like a great system and intresting that the UHS pads works with other one step compound polish. It's a time saver when the AIO is not enough. But the Blackfire AIO was it not to be able to work with a rather coarse pad and cut and finish good? What pads did use with the Blackfire AIO?

Have you tried the UHS system on ceramic clearcoat paint?

Thanks for shareing your work!

Haven't tried BLACKFIRE AIO on a coarse pad. Tried it on a Rupes white pad, meh... And then tried it on a Rupes yellow pad---much better. That's the combo I used on the GMC. Cleaned out the surface film and produced high gloss but did not remove moderate deep scratches. Decided to up the cut more with the UHS system and it got the job done with a LSP ready surface.

Have no idea how it will work on a ceramic clearcoat paint. My guess it might fall just a tad short on a complete removal. Not sure tho...

Tom

[wing commander]

Tom nice job and about the Black Fire AIO I have been using orange HDO pads and getting good cut.

[Mike@DedicatedPerfection]

Wow! Looking good!

Thanks for sharing