Ford Ranger with Chemical Guys / Carpro / Swissvax

[kalvintong]

Hi Guys, and Pro Detailer .
few day ago, a do it for my Friend,
this Ford Ranger he polish 2 times ago with Flex 3401.
swirls / scraches
Paint : Compound with Menzerna 400 -> polish with Rupes Fine system
and then apply Swissvax Sheild
Wheels : Clay/ CG wheel coat sealant

Thank for watching and talking to me another ideals for best result

After wash - clay and dry. Check it under Sunlight

Swirls and RIDS with my finger


Few scratches on the truck

And then.
I compound with Flex Rotary PE14-2. I use Menzerna 400 + medium cut pad. Speed 2 - 4-5 pass.
Result in Tailight
Finish polish with rupes mark2 15mm + yellow rupes pad

I use Rupes MF to clean polish + IPA 10%.
Next step: I apply swissvax shield











Sent from my iPhone using Autogeekonline mobile app

[SWETM]

Do I understand you right when you want help to get a better correction on the picture you point your finger at?

Looks like you did get a great shine and clarity in the paint!

Do you have any before pictures?
What pad did you use on your 3401vrg and fg400?
How many times did you passes before moving to a new section?
Do you work with very clean and good quality microfiber towels to wipe off the polish compound with?

Sometimes when the paint is in very bad condition when you start polishing. It's hard to get all of the swirls and scratches off. Without polish the paint to be dangerously thin.

[kalvintong]

Tks sir.
My finger to focus defect on the paint after wash/ clay this truck.
My friend, owner this truck use 3401. Not me, I dont like it.

Sir. When ai buy swissvax from my dealer. This product follow with Cleaner Fluid Regular. But I don’t apply it before use swissvax. It’s right ?


Sent from my iPhone using Autogeekonline mobile app

[SWETM]

Okay understand it.

Don't think it's necessary to do. If you do some polishing before you apply it or you top it on another protection it's fine to not use the cleaner fluid. But if you where to do a wash and wax to a car that has an old protection on it and no need to polish. Then I would use the cleaner fluid so that awesome swisswax can shine at it's best. So if you would need to clay the car before applying the wax I would also use the cleaner fluid.

[fightnews]

Hi Guys, and Pro Detailer .
few day ago, a do it for my Friend,
this Ford Ranger he polish 2 times ago with Flex 3401.
swirls / scraches
Paint : Compound with Menzerna 400 -> polish with Rupes Fine system
and then apply Swissvax Sheild
Wheels : Clay/ CG wheel coat sealant

Thank for watching and talking to me another ideals for best result

After wash - clay and dry. Check it under Sunlight

Swirls and RIDS with my finger


Few scratches on the truck

And then.
I compound with Flex Rotary PE14-2. I use Menzerna 400 + medium cut pad. Speed 2 - 4-5 pass.
Result in Tailight
Finish polish with rupes mark2 15mm + yellow rupes pad

I use Rupes MF to clean polish + IPA 10%.
Next step: I apply swissvax shield











Sent from my iPhone using Autogeekonline mobile app

Nice job! So thats the new ranger huh? They sure didn't look like that in 97 when I had mine. If it did I wouldn't have hated it as much. Are you not worried about those tires kicking up rocks and contamination sticking out like that?

[kalvintong]

Nice job! So thats the new ranger huh? They sure didn't look like that in 97 when I had mine. If it did I wouldn't have hated it as much. Are you not worried about those tires kicking up rocks and contamination sticking out like that?

Hi Sir.
This 2014-2015 version but owener modified. Fuel Wheels , BFgoodrich Tires , Racechip Engine Turbo... Led Light...
I ask him about this. This truck need fender. but he talk to me . " Sorry, I like this "

[Sizzle Chest]

Nice work! Came out nicely!