Search:

Haven’t been on here in a while. I’m patiently waiting for some good weather and clean roads haha


75002

So far, the UK 3.0 is holding up well. When I re-apply, should I wipe it off? Or is it good to go after I apply?

19s

They didn’t come with the car because I have the regular ZL1 but they are OEM ZL1 1LE wheels. 305 up front and 325 in the rear

The cat approves......


https://uploads.tapatalk-cdn.com/20210612/4df5f0e157fde9e1ad5dde48f049555a.jpg

That’s what I’m thinking. Seems a bit premature, especially with a ceramic coat

Hey guys,

I just noticed this issue on my oem hood insert. There’s a section of haze that stretches across the entire edge of the insert. Also, there appears to be a yellowish color underneath the...

Thanks, guys! I’m going to try the 3.0. If I’m not satisfied then I’ll pick up a bottle of DLux

Would I have strip the old application off the plastic if I wanted to add more down the road?

It’s probably the best blue they’ve made. Unfortunately, it was replaced by Riverside Blue in 2019. It’s a nice color but it’s a bit darker than what I have

Always protecting the paint whenever I can

https://uploads.tapatalk-cdn.com/20210428/ad6f690f31e72ed2c46bb2f2ebe33e7f.jpg...

Has anyone used Cquartz UK 3.0 on plastic grilles, etc? I know they offer a ceramic coating specifically for plastic, but I still have a full bottle of 3.0 left. Based on what I've read, the 3.0 will...

I think spring is finally here in northeast PA

https://uploads.tapatalk-cdn.com/20210408/2f82dc8bc79c6785005f60242326123b.jpg

I hope everyone took advantage of the nice weather we’ve had over the past few days!

https://uploads.tapatalk-cdn.com/20210312/39e2458911bbb4597b2de20d3ed52831.jpg

I didn’t see a big difference after applying water to the cracks. So, would Cquartz UK prevent the resin from turning yellow?

The crack in the second picture appeared randomly after sitting on my table for a couple of weeks. I haven’t been near the wing, which makes me think that it might be a stress crack. Will I have to...

Hello everyone,

I was looking over my carbon wing and noticed some cracks. I was wondering if any of you had experience with repairing carbon fiber. I can’t tell if the cracks are in the coating...

Waiting patiently for some nice weather
https://uploads.tapatalk-cdn.com/20210304/bf7f284d46886ce36fda25ebd1a978a7.jpg

I usually clean the face of the rim with a microfiber wash mitt, which has worked well. I'm in search of something that will reach between the brake caliper and barrel. Will a set of wheel woolies be...

Hi all,

I'm in search of a new tool to clean my wheels. There are two brushes on the market that I am considering, which are the EZ Brush and the Speed Master. From what I've read, these brushes...

I was using fg400 with a LC thin pad. The paint has metallic flakes and
looks almost like it has a flat finish to it. It's beige and is a lot lighter than what was on the pad. The test area looks...

Tested out a small section on my 85 Eldorado today. After a few passes I noticed that my pad was turning grey. Does this look like dirt that was trapped in the paint or paint transfer? I used a clay...

Thanks, you guys are awesome! There's probably a ton of pollen on my car so I'll see if the wash helps.

After applying 2 coats of 845 to my vehicle, I noticed that it did not bead as much after the first rain storm. It almost looks as if the wax was eaten away by the elements outside. I washed and used...

The guy who did the paint work was buffing the truck with a dirty pad and without washing it which would explain all the marks. It would be a shame if the holograms were under the clear.