Search:

In spray form for tires like you describe had good luck with Stoner Tire More Shine, Just my .02

I don't know for sure but my instinct tell me its 2 coats to ensure 100 percent coverage. Either way when it comes to ceramic coatings or any other products for that matter, its usually best to...

Thanks for starting this thread. I was wondering the same thing. I don't mean to take this off topic but i was wondering if ceramic coatings would work in a shower as well? How cool would it be to...

I'm very thankful so many of you have chimed in to offer advice. Thank you. I thought that an IPA wipe or Gyeon prep what have you was necessary after the polishing step in order to get proper...

Thank you everyone for all your replies and helpful information.

Thank you. There are too many choices aren't there? I have some Nattys blue laying around.

I have heard that as well. I was told 845 doesn't always play well? Not sure, never tried it.

Looks great. Megs 26 is very inexpensive too.

I would not have known about the dust collection.

Thank you all for your time and replies so far.
Al

Looks great. Really shines. I also usually use my 3 inch pads for waxing as well.

Applied by hand or can I use the DA with a soft finishing pad? I can say you introduced me to a wax I never new existed. I'm speaking to the Dodo.

It is not a daily driver. I thought a prep is necessary for proper Sealant adhesion? I know for coating it is for sure. Thanks for the tip.

I was leaning paste/liquid carnauba wax then maintain with my spray wax. I use either Megs synthetic X-Press spray wax or I use Griots Best of Show Detailer spray wax. What Carnauba would look...

2017 Corvette Torch Red.

Plan,

Wash
Clay (If Needed)
Polish M205 or Sonax Perfect Finish
Prep with IPA or Gyeon Prep
Seal with Jescar Power Lock ( Wait 24 Hours) then,

Thank you for the reply.. I'm sure why I haven't heard more either?

Hello. Is it just me or is harder to remove defects from plastic painted body parts than other parts of the car? Seems like the rest of the car is easier to find the right combination to get the...

Thank you very much Mike.

Thank you for the reply. Appreciate it.

Hello all. Can I only use Rupes pads on a Rupes machine? I have quite a stock of Meguiars and Griots might buy a Rupes machine but don't want to be buying all new pads ertc. I use primarily use 5"...

60526


Bought a new to me SUV from the dealer and this brown stuff is on the tires. What is it and how to remove? Tried Megs APC full strength with a brush. Little better.

I would like to see how you trimmed the shroud as well?

Good point about the warranty.

I have a Mwguiars MT 300 with the 5" and 3" backing plate. I thought the Griots would be an excellent addition to the stable. The Makita is a double duty tool. Thank you for the reply. I just want to...

What would you do? I was all set to pull the trigger on Griot's Boss 15 and now the new Makita shows up. This would be in addition to my Megs MT300. I am not a professional detailer. Just a hobby...