Getting my Riverside Blue 2SS 1LE and though I have ceramic and graphene my cars in the past for this one I would like to try going with a low gloss ceramic, I don't want the shine I almost want a...
I don't think the lake county blue pad is for cutting and correction so 5 would be a bit fast on the PC. I use a PC and I cut on 5 or 6 and polish on 3-4. I also use 4 pads when I do my car.
Your question is like asking what is your favorite color/brand of underwear, I personally like the easy of use of Ethos Graphene cause I can do it in my garage on a warm day, I am two years in with...
With my PC I have found a Microfiber cutting pad is a good place to start and I like the D30016, 90% of the time it gets most of the defects out and if I want to get more out I step up to a yellow or...
Don't feel bad about taking 25 hours. That's about what it takes me to do a full correction. Wash and inspection, Tar and bug remover, Iron X, Clay, Wash and dry, Then I hit it with Yellow pad and...
If you plan on taking off road I would suggest PPF on the bottom once you decide how to proceed with paint protection. Do the PPF after correction but before protection application.
It's my understanding that you DON'T sign the ticket, lock it in a safe and see a lawyer. If you don't sign it then the lottery has no right to disclose who you are and the lawyer can set up a...
I had the factory PPF on rear quarter panels and had installed PPF on the front bumper and front hood area. I have no chips after 4 years but I don't do a lot of highway driving. You are more likely...
Never had an issue with CarPro IronX staining. I don't spray directly on to glass rubber or plastic and I make sure I rinse throughly behind all trim and my next step is always a thorough wash.
It's my understanding that single stage paints were sprayed for commercial use. I would check your paint code and make sure you have single stage white. If still unsure you can test spot with a...
I have only used the griots and have no complaints. I bought a three pack and they have held up well. I use to clean the top of our glass top range. I only do the range by hand though. I have...
I use the lake white pad and it works well don't forget to tape at least the corners on the PPF. Product can get under loose corners and edges. Learned that the hard way.
You stated you had ceramic, if you have ceramic you don't need a topper, clay, or decon. The ceramic is taking care of protecting your paint, you depending on the ceramic you had applied find the...
most people don't realize that some factory black rims are powder coated. there are numerous articles on powder coating. I am having mine done right now. 525 all 4 includes powder and a clear coat....