Search:

My fréquency on the Leather sealant:topcoat is about 3-4X a year...
But conditioner, 2X on the dailys.

I dunno. Back circa 2 decades ago -----as I look back and how I changed habits, I think one...

Thx. Issue is not seating it.
Just setting the pre-formed weather ship evenly and pressing it in so it sits evenly was my issue.
What appears trivial on procedure was not quite what I...

I spotted that when zoomed in to see the color match of the replacement....
Those are not as easy as it looks - at least in the 1X I attempted it.
OCD kiddos rubbing the bottom on both rears....

All foam or soft foam, sponge applicator ?

A hard foam core with a softer face does help you press in to get into all its nooks and crannies .
To go back a few reply earlier, how did the tire...

It's very thick.
OP, I re-read the 1st post. Tires appeared uniformly even and dry during initial app ?

I need to do a water droplet test after the recent Shield (Aka, TRC rename of Sealant) post yesterdays app when I get back

I don't catch or remember the details often but seat of the pants -...

I gotta do more reading:youtube:revisit on colourlock leather shield on which I had re-topcoated back in February (aka, just 2 months ago).
Was slightly concerned but the conditioner took in just...

Curious do you have schedule when you apply leather conditioner. To some degree, if it's a daily and sit's outdoors, it may dictate things differently.
Or a daily that get's alot of -seat time-
...

I'm sure a post or the like exists....
If not, I should do one.

Anyone ever seen a post of where a interior marketed (branded) coating was done either on a towel or piece of sheet paper and then...

Was the replacement trim a good color match . Here's hoping for us car n3rds who have a eye for these sorta things, it was.

I've replaced sill rockers that crack and I've never had any good in all...

Fashion vs Function eh....

I don't wanna talk you out of them but if you have the opportunity to order like item in regular handle and compare and contrast, you might find the latter finitely far...

I've got all the Cobras and Flats including the Unicorn Offset Handle Flats


Can't teach a dog new tricks. For me, it works in certain situations, but more often then not, I'm grabbing my old a##...

Did you buy the Comfort Grips cause you like them or you thought it was a upgrade since it said comfort

I hated my Comfort Grips....eventually sold most of them (still have a few floating) and all...

Yes, on the rubber wheel

I've done the plastic scraper - then 3M Adhesive, solvent, terminator, more scraping route. IME, the tape is just tenacious and annoying this route. Even with the soaking...

And for real OCD.....ahem....one preps the wheel before getting new tires installed (if you are fortunate enough to be using a different set of wheels physically on the car). It's my preferred way to...

Just absolutely floored that I never picked up on using it more often since it's been awhile since I have had intricate many spoke wheels - but Iron Dwell, HP Rinse is a complete touchless wash that...

Who here has real world experience with using Iron remover when cleaning your wheels and it's it's effect on the LSP - in this discussion, mid:high solids coating.

For me, I currently have Dlux...

I've had concerns but sofar....I've yet to find a missing weight. VHB or any decent weight supplier should -fuse- to the substate it's being attached.

Now that I'm putting this into perspective,...

IME with softer compounds (would call them sticky-oily), HP rinse never works for me. Always a film left.

However, apparently per the recent updates, CHEMS and HP rinse will do it.

You know why...

I've seen the way......and or need to do more reading on coatings, and real world feedback on using a Thioglycolate Cleaner on them consistently, etc. If the findings/readingss says it doesn't faze...

I must Not be using Iron Remover as Often as I should

I really only use it at end of season - wheels off deep clean sessions - and maybe once mid cycle when summer tires are on between March-Nov....

I'd say coat them as a first pass - of the Cerium is exactly like their Cerium trim, love the finish but it shows water spot very easily

I think:feel all the water based paint is crap these days...
So even just painted barrels, painted spokes of a machined feel wheel is SUS.

For example. the 1st thing I generally do on a new car...

I see re: TW coating...

I still have my TS . I've used it on a few cars I've sold....it does last until it chips. I think it has its market and may work for BillD if he's not running low pros -...

Tufshine.

The TW stuff - like the Acrylic Tire Shine. I've used that. It's not a coating like Tufshine.
I consider the TW a strong dressing
Tufshine goes on completly clean, dries to a touch,...