Wow.
I don’t know if AGO will recover from it. Hope it will, fingers crossed. But it is like losing Tom Brady.
He was/is so important for the field, like a codifier, put things on simple terms,...
The fact is that you'll never be completely sure that you removed 100% of the old, cured coating unless you sand it. Especially if the coating to be removed is the new breed of top notch coatings,...
I'm having the same problems, Mike. Probably the underscore in my nickname. Could you please change it to RPM.BR? Or RPMBR, in case the dot is a problem too.
The follow up after cutting with a rotary/wool/Menz400 combo would be determined by the clearcoat hardness, and thickness.
Nowadays we have better finishing wool pads, like the LC hybrid wool pads,...
Jason Rose on his recent visit to Asia addressed this problem.
He used a Rupes polisher, UHS, and short working cycle, like two to three passes, no pressure.
...
If the clear is hard as you said it, maybe after the 3000 wetsand it would need it a 5000 wetsand after.
When the clear is hard, I try to avoid wetsanding, since it becomes a pain to remove the...
Lot of coatings are made with polydimethilsiloxane, which are chains of Si linked with O, it ends up SiO2 when it cures by reacting with O2 molecules present in the air.
Whatever the price the detailer charged you for, I think it is the detailer's responsibility to achieve a flawless, or a near flawless finish, before applying the coat.
A coating will seal the...
To make an analogy, I would say Rupes is Apple, Flex is Windows.
Advantages and disadvantages on both sides.
In the Rupes environment, more control and guaranteed results in beforehand. Costlier,...
Nobody is chiming in, I'll see if I can help you.
First, you have to be sure if the clearcoat is completely cured; press your nail in the border of the piece and see if it leaves nail mark.
Second,...
Imho, menzerna, long stroke polisher and open cell pad don't work well together.
Open cell pads, like the green pads, require a compound with a thinner emulsion, like UHS, for instance, to be...
The journalist rule for acronyms is to write the full name first in the the text, and the acronym in between parenthesis, like Ultima Paint Guard Plus (UPGP). Since it is already stated in the...
You'll need a product that cut severe swirls, but with a good finishing ability. Ok. But it will be dependant of paint system, polisher and pad choice, and polishing technique. Too many variables....
I've never used the XFE, but I believe it is similar to a Rupes 15. If your polishing style is to put some downward force when polishing (I do), thicker pads are the way to go.
Although Mike says...
I believe the Flex14-2-150 was designed for backing plates up to 150mm (roughly 6 inches).
Therefore, it would be a bit underpowered for the heavy use of boat polishing with larger pads.
But Flex...
PG1000, imho, is more rotary oriented, rock in a bottle type of product.
After 300 came out, the 1000 became redundant, since the finishing is worse than the 300.
I never tried the new 1000...
My user profile is bugged too.
VBulletin avatar, which I was able to remove it, and when I go my profile, it says 'This user has not registered and therefore does not have a profile to view. '.
A...