Out of curiosity would a 1 inch pad in rotary mode burn paint faster or slower than say a flex with a 5 inch? I'm assuming it would take longer due to the rotational speed at the outer edge of a...
It's pretty much area. We are in South OC, CA. We started out much lower but as time went on we increased the prices because we were taking a lot of time and people are willing to pay it because they...
Funny thing is it was worse than is the photo's. I was having a hard time getting it all in one shot at the correct angle because it went from the fender all the way to the rear taillight....
He doesn't want to deal with them. I told him to send the photos and see if he can get something back. He just said he wants to put it behind him. Total 750$ detail.
Thank you. Yea he used the photos I took to write a neg review on their site. I should have put our company name and phone number on the bottom of the photos before sending them to him lol. I have...
He called us wanted the 2 step process which would have been 550$ but when we did the test spot with the HD Speed he liked the results so we charged him 350$ and he gave us $450. He would have paid...
Client took his Infiniti to the corner car wash/"detailer" and from what I am guessing he asked them to make it look like a Zebra. He picked it up and they had it in the shade so he didn't notice...
I believe that will be the price for the kit. My local detail supply shop said 399-599. I can't imagine the tool alone would be over $399 though. Either way, I see it as having a lot of uses so it...
We have found that XMT AIO works well on many spots. I haven't had much luck with any of the sprays designed for it. XMT 360, Rupes 21 and the yellow pad. The only way I have seen to prevent them is...
I agree. We actually just did a 52 Chevy Sunday. Was painted about 6 months ago and this was the first wax. It had those little rust particles everywhere. We tried every clay we had (about 5...
Just to throw out another possibility, the black can be from the rubber moldings. I know if I even hit the sunroof rubber moldings for a second with the pad, it turns black.
We have sort of a brush addiction. We have had up to 15 different brushes in our wheel bucket. I am just not sure the names of them. We have since narrowed it down. We did try the Speed Masters and...
Yea you just have to try a test spot with different combos until you get it where you want it. The Rupes compounds work well and I have heard some good things about the Griots creams. We have had...
Nice. Be careful Evo's are golddiggers. They will take your money quick. It is so easy to make power it's addicting. I have a 2012. I'm at 500hp at all 4 wheels and it didn't take too much to get...
We were detailing a 52 Chevy Sunday and one of the neighbors wanted to know if we could do his boat. It's a 21 foot "fishing boat" deep V bottom with a cabin under the bow. He wanted the gel coat...
Thank's for the responses. I clean the pad with a MF towel while running it. Usually after every section. Could be too much product but strange that it doesn't do it on the upper part.
Using that soap may not be as bad as the lady my partner and I watched at the gas station go through their little drive through car wash then dry the whole car with the paper towels they have by the...
Curious question here. We use XMT AIO for a lot of jobs. The stuff works great. (AG Please sell it in a gallon or even 5!!) We use it with the Rupes 21 and Duetto along with the Yellow or White Rupes...
We bought the Vac N Blow last year when we started our detailing company. Forget the exact model but it was like 399. You can hang it on the wall or use it on the ground. It seems to...