Here's a few pictures .http://i573.photobucket.com/albums/ss179/jeepster19/821bb49f5ccf42bedb3f579092ee72c1.jpghttp://i573.photobucket.com/albums/ss179/jeepster19/1aff331afa77ad08c8ddad4d972e9b4c.jpg
I have a 90 Mustang GT that I have orange peel on the tops of the fenders.I recently damp sanded one of the fenders with a griots garage 3" DA polisher.
I know.The rear bumper is at the paint shop along with the front nose and a new hood.The rear bumper had a few spots on it and the front had some light pitting so I decided on a repaint so it would...
The Gt is equipped with factory cheese-grater tail lights.The entire car has been buffed except for the area where the license plate goes.I know you will never see this area once the plate is on but...
I have never used a waterless wash but I have seen it used years ago.I was thinking of using it on my black 90 Mustang GT.Is this stuff really safe?Which product is the safest for the paint?My car is...
Update on PE-14 Flex.This machine is exceptional!I used it on my horizontal panels with a 3M Super Buff III 3 wool pad and M105 to get the acid rain removed.Tons of power&super smooth action and very...
How long should I allow the Meg's #21 to cure?The car is garage kept&only driven on sunny days so its protected all the time from the elements.So I assume it's ok to apply the wax over the sealant?
I used Meg's #21 on a few panels but I like the Meg's#26 yellow better.What steps are needed to remove the Meg's #21 so I can apply the Meg's #26?The Meg's #26 has a much smoother-slippery finish...
I've heard that some people wash them first because some colored microfiber towels bleed color.That is for the ones that are not pre-washed.If it doesn't say just wash them to be safe.Yes,pull any...
My new PE-14 just came in today!I'm new to paint correction but this tool is simply amazing!Very easy to control,powerful&just a pleasure to work with in every way.It will take a little getting used...
I have always wanted a coupe because I like the look.besides it is several hundred pounds lighter that the hatchback.Most coupes are someone's ragged out drag car or daily driver that hasn't been...
I pulled the Mustang out and blew it off with my blower as I wiped it down with a microfiber towel.I also used the compressed air to blow out the cracks.Now it's time for some Meg's #26 yellow to...
I just finished buffing&polishing my 90 Mustang GT.I have a fair amount of dust on it from the compounding process and would like to know is it safe to rinse&dry the car to get the dust off without...
I recently purchased a PC7424xp back in mid March.I've had great success with it thus far.It does a super job on the vertical panels on my car but the horizontal panels,hood,tops of fenders,rear...
I talked with him about the two panels he agreed to do the whole truck.I told him $50 an hour and he didn't make a fuss.I hope I get the job for this upcoming weekend,I could use the extra...