Search:
Type: Posts; User: jgg85234 ; Keyword(s):
Search :
Search took 0.01 seconds.
Wait. Back in the 80s, the snowbirds were here in AZ all winter. Then the Zonies (us) were on the beaches in San Diego all summer. Nobody doing that any more?
Jim
There's a Chevron station at McQueen and Elliot Rd that will do touch or touchless.
I've heard there's one at Alma School and Guadalupe, but I've never been there.
Check out the Chevron...
Go to Forums -> Company & Forum News Headlines
The second Sticky (at the top) is about West Coast shipping, and what to do to upgrade your shipping to 3 Day Select (no charge to the customer)
...
I'm still here in Gilbert. Just haven't been very active. Virus got into my heart a while back.
Jim
Flex Umlaufbahn or Umlaufbahn fünfzehn
Best regards,
Jim
OK, time to jog the collective memory. I don't know why they haven't ever included written instructions with the Lake Country Changeable Backing plate system, but rather just discontinued the 6"...
My bad. Must be the meds.
I don't think that queen starts with a C :xyxthumbs:
Jim
Lost again in your own acronyms?
GC = Garage Queen
DD = Daily Driver
Jim
I think you hit on the problem right from the beginning. The wax is building up in the towels, especially since you aren't using any detergent at all.
You should probably experiment using a...
Here's a link
WeatherTech FloorLiners For Trucks & SUVs, floor liners, custom floor mats
Best regards,
Jim
Pic is stored at Autopia, not Autogeek. Won't display unless you are logged into the Autopia forum. Once you are, you can see the pizza.
Best regards,
Jim
I don't know if I can completely agree with that.
I was out in this dust storm (going south on the 101), and got off when I realized I couldn't see the street lights that were directly overhead....
Out here in AZ, we always complain about the summer temperatures, but rarely gloat about our weather for the bulk of the year.
High 70s or low 80s for daytime highs, and at the moment, low 50s for...
Hi guys:
Too much time clicking Today's posts or New Posts, and not enough time actually exploring the forums.:props:
Forums->Ask the Expert Featuring Mike Phillips
You'll find several...
Hi Bill:
Try making them 800x600 instead of 800x800 and see if one loads.
If it's a normal camera, the geometry is 4x3 and you're telling it to make a square rather than a rectangle. That...
http://www.autogeekonline.net/gallery/data/500/medium/StrikeThrough.jpg
I hate showing images of my mistakes, but here's what it looked like. If you look closely, you can see the oversprayed...
I turned it by hand to see how many actual rotations went with an orbit. The ratio is definitely 10 to 1.
That's why I was confused about the maximum rating of 9600 OPM. They must be counting the...
According to the documentation, the rotation rate is 1/10 of the orbit rate. I checked this out early this year when I got mine, and verified that the 10 to 1 ratio is correct. That would put the max...
I, too, was faced with that decision earlier this year.
Here's my analysis and conclusion from another thread.
...
Ich wünsche dir eine gute Fahrt.
Hope your travel goes well, and
alle ist in ordnung
when you arrive in Germany.
Best regards,
Jim
Seems like most people are buying the LC backing plate system to get the 4 inch back plate. Not many people use the 6 inch plate.
LC has said there were some problems with the 6" back plate...
After using my 3401 on my cars, I've used it (or allowed others to use it -supervised) on perhaps a dozen cars.
It gets warm under extended use, but not hot.
I have the standard backing plate...
Fired up the old Teac A-6010 tape recorder (reel to reel deck). Needed some lubrication, but still works just fine.
Got out the batch of tapes I recorded (7 1/2 IPS) of
Fantasy Park...the...
Found that stuff on the mud flaps on one side of my wife's Pathfinder. Standard tar removers haven't touched it. It doesn't look black, it looks clear.
At least now I know what it is.
...
We didn't get any of that rain either.
But, it's finally raining now. I'm going out on the back patio to watch.;);)
Jim