I've been using Essence as a primer to a non-Cquartz coating since Essence was released about 6-7 mos ago. And so far, everything is holding up great. I've coated approx 20 cars like this, including...
the "topper" is the top nano coat. After that, you can use any wash products and waxes you like to clean and maintain, it just wont last as the Nano will repel them after full cure. I use the green...
Someone on the Pearl Nano Intallers FB page already threw a plethora of chemicals at pearl and they did not strip. Dont remember exactly what he tried, but straight acid and some other really harsh...
I agree with neither, although I use hyper on tires. Both will run off of trim in the rain and not last too long, depending on how many coats a,d how you diluted.
Had this on a customers Acura TL. We used a paper clip and vacuum to try loosen the dried milk and suck it out. Then I sprayed Megs D116 all into the holes and left it for a bit, then sucked as much...
Are you talking about Pearl Nano? If so, the reasoning behind the 2 layer system is many. Separetly, the 2 different coats offer different abilities. The base coat isn't as hydrophobic as the top...
Thanks, I've been using Nanoskin mitts for years now and know how to clay/use them. I know the rubber is supposed to be somewhat sticky, I was just surprised that it reacted with the D114 in such a...
I recently did, mixing 1:128 of d114 I used it to clay a vehicle. The D114 seemed to affect the clay mitt by turning the rubberized areas SUPER STICKY to...
I was a little too late on this thread, but I had this same problem. A customer sprayed his headlights, rubber window trim, and various other black trim on his oxidized white Honda Van and DIDN'T...
You cannot see your customer history on the square mobile app yet though, only from the dashboard. I hope one day they fix this so i can dump my current point of sale.