I have my full hood covered with a clear bra and I was wondering what kind of problems that will cause for hail dent repair. Is the clear bra in the affected areas going to need to be removed?
...
So what do you have against these foreign manufactures such as Toyota or Honda that are building factories in the United States? I mean to my dismay, if I order an Acura TL from the factory, it...
Not that I requested but I am hoping to see my 1/2 gallon waterless wash show up in paper. UPS has done an extremely awesome job of damaging packages with heavy products (1/2 gallons or gallon...
And if you have ever had an issue with clean glass causing your microfibers to lint, once the windows are coated with opti-seal the problem goes away ;). Still can be an issue on the inside.
When I had brought the topic up before of topping collinite 845 over poli-seal, a 12-24 cure time was highly recommended for the protection portion of poli-seal to cure. However, due to winters...
It is possible having something under the opti-seal could cause fogginess, I believe opti-seal will try to work itself to the bottom when applied over another product which never sounded good to me...
Applicator - MF pad, currently I think its a Meguiars Even Coat applicator. I switched to this from a yellow foam applicator because of static, a good clean window, some opti-seal, and a foam pad...
I just get so excited when my order gets here that the peanuts go everywhere. :buffing: And it can be rather sad to watch my dogs chase them like two cat nipped fur bags.
I have never had to warm it up. I have never tried applying it below say 55-60 degrees and a good shaking of the bottle has always turned it to liquid.
I have found it to always be visible when applying it to glass and you will notice the product flashing off with that oil slick look. But if your applying the "correct" amount, the time between...
The oily smear you are likely seeing is from using to much product. When I use products that are WOWA (Wipe On Walk Away), I always follow the application up with a microfiber and a light touch to...
I also assume they wiped it down prior to installation which is fine as they have to warranty the product. I also wiped the paint down twice with pre-wax cleaner after polishing it and prior to...
Because there were scratches/swirls in those areas and the clear bra may hide the swirls directly below the bra but it doesn't hide the swirls next to it. I didn't want to compound/polish right next...
The wife got a new Mazda this week, and after we took it home and polished the areas that were to be covered with the clear bra, we took it back to the dealer to get the work done. When we went back...
I would go with M205 and a finishing foam pad of some sort. If Wolfgang SR is less "abrasive" than M205, I would go with that instead but I have never looked into SR... Chris from optimum normally...
I haven't been to a race since I was old enough to remember, so this weekend at Road America was quite the experience. And to my amazement, I believe my wife will be dragging me to the next race...
If I am doing something like Opti-coat or Opti-seal that requires priming the pad and doesn't show up real well on the applicator, I use the outter seam to determine what side to use. The seam...
I am going on about 10 months, water still beads like crazy on them and I have yet to need anything stronger than my car wash solution and a sponge to remove brake dust and tar... Even if I had a...
Autogeek Professional Detail Bag - hands down would look better than the tote I use to keep my polisher and polishes in currently and would be easier to carry :D.
