Most clearcoats will heal light swirls by themselves with heat above 100C deg, we have proved that in our facebook page, even the new cquartz Lite healed, and again its not from the coat , its from...
It wont get harden in the bottle, you can have at least 1 year shelf life after opening, if closed tight the cap and kept in cool dry space. with 150ml you can do 5 cars minimum, and we do recommend...
You can reach more than 30 days beading from Elixir using on the car.
and something we found interesting lately, its possible to use it like Hydro2 as well, spray on rinse off !!
so we can say its...
Its more durable than v1 , solvent resist , water spots resist ( as much as possible) , its basically a coat .
here is great video to see how its applied and perform :
YouTube
Hi, normal polish is not good enough for glass polishing, you need to use glass polish compound , like Ceriglass with glass pads ( rayon wool) and polisher
when the glass is fully hydrophilic , no...
Temps are now very high , make sure you apply in cooler environment temps
if its impossible add another 20% water to your Hydro Lite to reduce flash time in such hot temp.
Try spraying on the surface as well beside the mf only,only on the mf is very thin coverage, Reload now is safe and more coverage will help to last longer, 1 mf for applying and another dry one for...
We did a short video while i was in our new factory in Korea showing how to use the latest CQUK 3.0
mind you the car is our test mule car so not polished before and applied under direct sun to show...
As said above , no need continuous applying, and no need waiting time, apply on and wipe off almost instant , specially if its humid
if it feels sticky use same applicator with few more drops on...
The main difference in the new version is easy to use at any temp, cold or hot,
important is to apply thin layer and even, to let flash about 1 min than to wipe off with short pile mf or the...
CQUK doesnt need waiting, its almost wipe on wipe off , once you evenly covered the panel area, like 60cm2 start wiping off, dont wait! if surface is too grabby it means the chemical reaction with...
Hi, first thing , its called Essence , not Essense
once you finished polishing with Essence wait 1 hour before coating with CQUK, will be good to do Eraser pre coat to release any residues left.
if...
The main thing about coatings is what real protection it gives you from resisting to chemicals, acids, minerals, solvents, salts etc.. i think in the test video Forensic detailing has dont you can...
The Reset after water dilution gets to 7 pH which is almost neutral , we did APC tests on Reload to show the durability effect and the strong bonding,
for extra life time of any coat its always good...
Hi, First thing, the limited edition bottle you got is same Reflect polish material, only the label print was made in 500 pcs . limited edition with opposite mirror print
about the sealing, the cap...
Hi, i think its some problem of your application as well, you need to apply much more squirts over the surface , 1 mf wiping it on the surface sprayed and another one or dry side mf to wipe it off...
Cquartz flash little slower now then CQUK , but not much, you need to feel the surface rather than looking if it flash, once it get tacky feeling , light sticky , start wiping off, at average 20C deg...
Coatings degrading by the abrasion you do on them, also how good is the coat depends how strong it bonded to the surface and how its good against chemicals we use on the car surface to clean it....
Hi,
you did well, CQUK dont need flashing time , you can apply on and wipe off, doing even layer not too thick.
work on small areas, like 50cm2 , almost WOWO , the sticky feel is the reaction of...