After not doing anything to my Mustang since before the winter, I finally found some time to do a full day detail. The paint was in pretty good shape so I used M205 on a polishing pad with my Dewalt...
Have fun. I'm glad mine's done! I had to replace one side of mine and repair the slab from water damage and termites. I used a few 4x4x10's and a floor jack to keep it from falling down while I...
Hello! It's been about a year since I was here last. Things have been pretty busy around the house. I just finished rebuilding my garage and putting a new suspension in my Mustang (Koni Sports and...
:iagree:+1
I've been following this forum for a while and I have seen the same kind of "latest and greatest" a number of times: Flex 3401, Flex PE 14-2, Dewalt 849. Same ooh's and aah's. ...
I use a DeWalt 849 rotary and either of two combinations:
1. Menzerna SIP 1500/SF 4000
or
2. Meguiars 105/205
After 1 or 2, I then finish with 3M Ultrafine Polish.
...
If you don't have the money for a buffer you can try doing it by hand with a Meguiars Hand Pad, some Lake Country Polishing pads, and some Meguiars Ultimate Compound. It will take a while, but it can...
Last year I switched from M105/205 to SI 1500 and SF 4000 using a rotary. The Menzerna SI 1500 is much easier to work with them M105. Longer working time and less dusting. It's also much easier to...
You would not want to do a cleaner wax over a sealant. The chemical cleaners will remove or damage the sealant. If you want to get more of a wax shine on a sealant, use a non-cleaner wax over it like...
1. Start with the least aggresive pad/polish combination and see if it works. Gradually increase the aggressiveness of your combination until the defects are removed.
2. How long between corrections...
There are a lot of equally good choices. I have used and recommend:
1. Blackfire Wet Diamond.
2. 4 Star Ultimate Paint Protection.
3. Duragloss 501 and 105
4. Meguiars M21
Follow the...