Search:

Interesting. Thank you.

Good evening. Anyone every tried Meguire's #7 polish on gel coat? If so, what were the result? Thank you.

Thanks again guys.

Thanks gentlemen. The boat has lite to moderate oxidation so I think I'll start with M105 and orange CCS pads. Depending on how that goes I may end up with #67 and the orange CCS pad (these I...

Guys I would be willing to bet that this question has been asked a thousand times but I don't see in my search. Here it is...what is the equivalent Lake Country pad to the Meguiar's burgundy pad? I...

I'll leave the response regarding old vs new SS paint to those who know. I don't think you're quit satisfied with the results yet and I get it. The water spots would be driving me nuts. Paul_g has...

I have a 2001 black ES300 and it's single stage. I've been correcting the paint for several years with a 1st generation PC, Meguiars UC and Meguiars yellow polishing pads. This combination has...

Sorry. I probably used the wrong acronym. The UC left a slight haze. Not much but just a little. So after using UC I went back over the panel with 205 to get the glossy shine. Thank you.

I thought I would update this thread for anyone who finds themselves in a similar situation with soft paint. I followed Billy Baldone's advice except that I used Meguiar's yellow 7 inch polishing...

Thanks guys!

I have Cobra white pads and white 5 inch CCS pad (I also have the 4 inch backing plate). Oh, and yes I have 205. So, your thinking white pad, 205 and maybe start with speed 4?

For years I've used the first generation PC DA for paint correction on our 2001 black Lexis. Specifically, I've used the 7 inch Meguiar's yellow polishing pad and Mequiar's Ultimate Compound. It's...

Guys I got my Flex last week and I also purchased the LC 4 inch backing plate not the 6 inch backing plate. The 4 inch backing plate came with 2 shims. In this thread it is pointed out that the...

Unbelievable!

Thanks again guys!

Daimler, of course I washed and clayed the night before. (I awarded the customer first prize for the most contaminants.). After trying a test area I went with 105 and the...

Thanks guys! Yep he was happy. After the customer picked up his case his Dad called me later and asked if I would detail his 2013 G37.

cleanmycorolla, the autogeek watermark is automatic I...

So, I got my second paying detail job last weekend. Used 3 inch Meguiar's MF pad with D300, then 105/205 with 5.5 LC CCS orange and white pad respectively. Then topped it off with Meguiar's GC wax....

Oh no, I've given you folks the wrong impression of my wife. I promise she has no past family connections to Attila the Hun! (Well, after considering her side of the family...) No, still no...

Thanks again guys. I'm sold...now the hard part! No, not the money - convincing my wife!

Thanks Guys. From what I've read about the machine I felt a user should save some time.

Eric M, I had to chuckle after reading your reply. I just have to learn to walk away from some defeats...

For any Flex 3410 users - Do you find that using the Flex 3401 saves time over a PC or other DA? Thanks.

Here's a picture (I hope) of the touchup paint that I am attempting to remove...or minimize!

Hey guys I need some advice. I have a black 2001 Lexus. I purchased the car about 3 years ago with exceptionally low mileage. Fortunately, the car sat in a garage but it collected 20 or 30 scratches...

PC - First Generation

I really love the UC but the MF system comes in with a close second!